Actions
Correction #15445
closed
Possible mistake in "WireGuard Site-to-Multisite VPN Configuration Example"
Start date:
Due date:
% Done:
100%
Estimated time:
Description
Dear all,
i set up a Wireguard Site-to-Multisite VPN according to the pfSense configuration example.
Configuring Site B ended up in an error stating, that the 172.16.0.3 can´t be used, because it is the broadcast address of the network 172.16.0.0/30.
After tinkering around i found out, that in a 172.16.0.0./30 network only .1 and .2 can be used.
So i ended up using a /29 network and all worked fine.
Maybe this can be corrected in the pfSense documentation here:
https://docs.netgate.com/pfsense/en/latest/recipes/wireguard-s2ms.html
Thanks.
Best regards
Related issues
Updated by Jim Pingle 3 months ago
- Status changed from New to Duplicate
- Assignee set to Jim Pingle
- % Done changed from 0 to 100
This was fixed in #15515 which is a duplicate of this one.
Updated by Jim Pingle 3 months ago
- Is duplicate of Todo #15515: Feedback on pfSense® software Configuration Recipes — WireGuard Site-to-Multisite VPN Configuration Example added
Actions