pfSense

While inserting/booting a USB760 CDMA usb modem one can't eject the CD to put it in modem mode because pfSense does not seem to be able to recognize the CD.

Here is the relevant dmesg output.

ugen2.2: <Novatel Wireless Inc.> at usbus2
umass0: <Novatel Wireless Inc. Novatel Wireless CDMA, class 0/0, rev 1.10/0.00, addr 2> on usbus2
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
umass1: <Novatel Wireless Inc. Novatel Wireless CDMA, class 0/0, rev 1.10/0.00, addr 2> on usbus2
umass1: SCSI over Bulk-Only; quirks = 0x0000
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
cd0 at umass-sim0 bus 0 scbus0 target 0 lun 0
cd0: <Novatel Mass Storage 1.00> Removable CD-ROM SCSI-2 device
cd0: 1.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
umass1:1:1:-1: Attached to scbus1
(probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error
(probe0:umass-sim1:1:0:0): SCSI status: Check Condition
(probe0:umass-sim1:1:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da0 at umass-sim1 bus 1 scbus1 target 0 lun 0
da0: <Novatel MMC Storage 2.31> Removable Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present

Trying to eject the cd0 device directly gives the error, "Device not configured."