Actions
Correction #16524
closed
IKE Endpoint Configuration - Remote Gateway part requires correction
Start date:
Due date:
% Done:
100%
Estimated time:
Description
https://docs.netgate.com/pfsense/en/latest/vpn/ipsec/configure-p1.html#ike-endpoint-configuration
It says:
To allow connections from any remote endpoint with tunnel mode phase 2 entries, use 0.0.0.0/0 for IPv4 or :: for IPv6. When allowing connections from any remote endpoint the Child SA Start Action must be set to None and the Peer Identifier cannot be set to Peer IP Address.
Should be:
To allow connections from any remote endpoint with tunnel mode phase 2 entries, use 0.0.0.0 for IPv4 or :: for IPv6. When allowing connections from any remote endpoint the Child SA Start Action must be set to None and the Peer Identifier cannot be set to Peer IP Address.
Updated by Jim Pingle 19 days ago
- Status changed from New to Closed
- Assignee set to Jim Pingle
- % Done changed from 0 to 100
Actions