Project

General

Profile

Actions

Bug #2296

closed

Traffic Limiter Bits/sec option broken

Added by Joel Whitehouse over 12 years ago. Updated over 12 years ago.

Status:
Resolved
Priority:
Low
Assignee:
Category:
Traffic Shaper (ALTQ)
Target version:
Start date:
03/15/2012
Due date:
% Done:

100%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.0.1
Affected Architecture:
i386

Description

What should happen:
When the bandwidth of an upload limiter is set to 100 Bit/s, and then saved, the bandwidth should stay at 100 Bit/s.

The buggy behavior:
When you save a Bandwith Limit of 100 Bit/s, and hit save, the reloaded page shows 100 Kbit/s instead.

Steps to reproduce:
1) Log in to pfsense.
2) Go to Firewall->Traffic Shaper->Limiter
3) If no limiter exists, create one.
4) Select a limiter
5) Set the bandwidth to 100, and select Bit/s from the dropdown
6) Click Save.
7) The value of the bandwidth will be the same, but the units will have changed from Bit/s to Kbit/s.

Actions #1

Updated by Chris Buechler over 12 years ago

  • Status changed from New to Assigned
  • Assignee set to Darren Embry
  • Target version set to 2.1
Actions #2

Updated by Darren Embry over 12 years ago

  • Status changed from Assigned to Resolved
  • % Done changed from 0 to 100
Actions

Also available in: Atom PDF