Project

General

Profile

Actions
Copy link

Bug #2304

closed

The javascript to enable and disable the various config boxes fail since adding the 6rd IPv6 config type

Added by Seth Mos over 12 years ago. Updated over 12 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
Darren Embry
Category:
Web Interface
Target version:
2.1
Start date:
03/21/2012
Due date:
% Done:

100%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.1
Affected Architecture:

Description

Doesn't actually need a working connection, just select 6rd and from that point on the other options are not disabled.

Switching to static v6 for example does not hide the 6rd options or dhcp-pd for example

Actions
Copy link
 #1

Updated by Seth Mos over 12 years ago

What I meant to say was, selecting a IPv6 configuration type on interfaces.php does not correctly toggle the javascript to hide the other choices.

Switching the IPv6 configuration type leaves the existing fields shown. They are supposed to be hidden when switching the interface configuration type.

Actions
Copy link
 #2

Updated by Darren Embry over 12 years ago

  • Status changed from New to Resolved
  • % Done changed from 0 to 100
Actions
Copy link
 #3

Updated by Seth Mos over 12 years ago

  • Status changed from Resolved to Assigned

Ok, the javascript successfully works now, but I can not save the interface config when I select "6rd" and press save.

Probably unrelated to your fix.

It will revert to "none" and none of the data will have saved.

a print_r() of that section reveals that only prefix-6rd-len is set. So nothing was saved.

            [wan] => Array
                (
                    [enable] => 
                    [if] => em0
                    [blockbogons] => 
                    [descr] => WAN
                    [spoofmac] => 
                    [prefix-6rd-len] => 3
                    [ipaddr] => 82.94.161.155
                    [subnet] => 27
                    [gateway] => GW_WAN
                )

Live HTTP Headers said this:

enable=yes&descr=WAN&type=staticv4&type6=srd&spoofmac=&mtu=&mss=&mediaopt=&ipaddr=10.94.161.155&subnet=27&gateway=GW_WAN&defaultgw=on&name=WANGW&gatewayip=&gatewaydescr=&ipaddrv6=&subnetv6=128&gatewayv6=none&defaultgwv6=on&namev6=WANGWv6&gatewayipv6=&gatewaydescrv6=&dhcp6-pd-sla-id=none&prefix-6rd-id=none&dhcphostname=&alias-address=&alias-subnet=32&dhcp6-duid=&dhcp6-ia-pd-len=none&prefix-6rd=2602%3A300%3A%3A%2F28&gateway-6rd=12.83.49.81&prefix-6rd-v4plen=0&country=&provider=&providerplan=&username=&password=&phone=&apn=&port=%2Fdev%2Fcuau0&pppoe_username=&pppoe_password=&provider=&pppoe_idletimeout=&pppoe-reset-type=&pppoe_resethour=0&pppoe_resetminute=0&pppoe_resetdate=&pptp_username=&pptp_password=&pptp_local=&pptp_subnet=31&pptp_remote=&pptp_idletimeout=&blockbogons=yes&Submit=Save&if=wan&ptpid=0

So the variable are being sent, but not saved.

Actions
Copy link
 #4

Updated by Seth Mos over 12 years ago

  • Status changed from Assigned to Resolved

My bad, fixed now.

Actions
Copy link

Also available in: Atom PDF