Actions
Bug #2673
closed
Traffic to IPv6 endpoint of IPv6 GRE Tunnel over IPv4 IPSEC causes receiving end to crash
Status:
Closed
Priority:
Normal
Assignee:
-
Category:
Operating System
Target version:
-
Start date:
11/04/2012
Due date:
% Done:
0%
Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.1
Affected Architecture:
amd64
Description
Issue:
Traffic going across an IPv6 GRE tunnel running over a tunnelled IPv4 IPsec VPN to the LAN IPv6 address of the remote pfSense box causes the remote box to crash & reboot. All other IPv6 traffic across the GRE interface works as expected
- 2x pfSense 2.1 amd64 boxes (NOT nanobsd), snapshot from 3rd Nov (also tried with earlier snapshot from 11th October)
- Dynamic WAN IP on each end
- Working IPv4 IPSEC VPN with tunneled IPv4 phase 2
- GRE interface configured at each end and assigned to an interface
- Gateways & Routes configured to send traffic for each site's v6 range over GRE
- Firewall rules configured to allow traffic across the GRE tunnel
- Side A
Parent Interface: LAN
GRE remote address: <Side B v4 address>
GRE tunnel local address: <Side A v6 address>
GRE tunnel remote address: <Side B v6 /64>
- Side B
Parent Interface: LAN
GRE remote address: <Side A v4 address>
GRE tunnel local address: <Side B v6 address>
GRE tunnel remote address: <Side A v6 /64>
Files
Updated by Chris Buechler almost 14 years ago
- Category set to Operating System
- Priority changed from High to Normal
- Affected Version set to 2.1
Updated by Jim Pingle about 7 years ago
- Status changed from New to Closed
Old report and no recent recurrences. Lots of things in this area have changed, so most likely it's either fixed no longer relevant.
Actions
Also available in: Atom