Added by Perry Mason over 14 years ago. Updated about 14 years ago.
0%
Description
Tried adding a vlan to lagg using 2 intel giga nic's without success as posted in
http://forum.pfsense.org/index.php/topic,21642.0.html
I notice in console that lagg ain't shown as a valid interface under assign interface
Updated by Ermal Luçi over 14 years ago
Can you try with another card?
It seems to behave ok to me.
Updated by Perry Mason over 14 years ago
Nope only got intel nic that works with pfSense.
Updated by Ermal Luçi over 14 years ago
Try creating the vlans over lagg and after that assign even the lagg interface and add a firewall rule to allow traffic.
Does this solve the problem for you?
Updated by Marcus van Dam over 14 years ago
Im the original topic starter on th forum.
I ahve tested with 2 intel nics (more precise, its an dual nic card). I did some testes and the results were:
2 nics -> lagg, no vlan: works.
2 nics -> lagg, adding an vlan: No traffic over the vlan, traffic over the parent lagg interface works.
2 nics -> lagg, only vlans: No traffic over the vlans, but arp requests work.
Updated by Chris Buechler over 14 years ago
Confirmed it works with non-em NICs. The underlying configuration is correct, problem in em driver.
Updated by Ermal Luçi about 14 years ago
Can you please try newer pfSense 2.0 builds.
It should be fixed by the jump to 8-STABLE as FreeBSD code base.
Updated by Marcus van Dam about 14 years ago
I just tried with the latest snapshot (pfSense-Full-Update-2.0-BETA1-20100125-2045.tgz).
It still hangs when assigning the interface, but at reboot it shows up. and i can configure it. after that still only arp packets, a ping won't come trough.
Updated by Ermal Luçi about 14 years ago
Patch committed to the build because this is a FreeBSD issue.
Report back...after a new build is available.
Updated by Marcus van Dam about 14 years ago
Ermal Luçi wrote:
Patch committed to the build because this is a FreeBSD issue.
Report back...after a new build is available.
How do you mean a new build? a new FreebSD build as in 8_1 or just a new snapshot? Or just give me a nudge when u can try again :-)
Updated by Marcus van Dam about 14 years ago
I think i have to congratulate you!
It Works! :-)
But, how did you fix it/Where was the problem?
Updated by Perry Mason about 14 years ago
Could also create a working failover link with em nics, though a reboot was needed.
Updated by Ermal Luçi about 14 years ago
This are the relevant commits
65ba850791ca318786fb36f0a42274ff7a83af4a
ac1dbfbd79d2489220ff0531f614250f55940176
64fd5b02c883db52511a333d8b879eaad2038d11
Updated by Chris Buechler about 14 years ago