Bug #6183
closed
Assign Interfaces allows you to define multiples of the same VLAN
0%
Description
New install of 2.3 on RCC-VE 2440. While assigning interfaces at the console you are able to add the same VLAN (e.g. 10) multiple times on the same interface (e.g. igb1). If you then set the LAN as igb1_vlan10 and login to the webConfigurator you are unable to modify or delete the duplicate VLAN. I've tried changing the VLAN ID, adding a description or changing the interface which all fail. Had to factory reset to remove.
Files
Updated by Zetto Null over 8 years ago
As a workaround in webConfigurator you can use the Diagnostics / Backup & Restore / Config History to remove the duplicate VLAN.
Updated by Anonymous over 8 years ago
- Status changed from New to Feedback
- Assignee changed from Anonymous to Zetto Null
Just to be clear you are adding duplicate VLANs from option 2) (Assign Interfaces) of the TTY console right, not the web interface?
Updated by Zetto Null over 8 years ago
Steve Beaver wrote:
Just to be clear you are adding duplicate VLANs from option 2) (Assign Interfaces) of the TTY console right, not the web interface?
Yep, adding the duplicate VLANs from the TTY console.
Attempting to add duplicate VLANs from webConfigurator results in the following error.
The following input errors were detected: * A VLAN with the tag 10 is already defined on this interface.
Updated by Chris Buechler over 8 years ago
- Category changed from Interfaces to Console Menu
- Status changed from Feedback to Confirmed
- Assignee deleted (
Zetto Null) - Affected Version changed from 2.3 to All
- Affected Architecture added
- Affected Architecture deleted (
amd64)
the console menu's never had input validation there. Good to have though
Updated by Jim Thompson over 8 years ago
- Assignee changed from Luiz Souza to Renato Botelho
Updated by Chris Buechler over 8 years ago
- Status changed from Confirmed to Feedback
- Assignee changed from Renato Botelho to Chris Buechler
fix pushed