Project

General

Profile

Bug #715

RRD Graph on Throughput Contains No Info

Added by Steve Vigneau about 9 years ago. Updated over 5 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
-
Category:
RRD Graphs
Target version:
Start date:
07/02/2010
Due date:
% Done:

0%

Estimated time:
Affected Version:
2.0
Affected Architecture:

Description

System -> Throughput RRD graph contains nothing. There are simply no graphs displayed. The system log has no mention of any errors.

This has been observed on:

2.0-BETA3
built on Wed Jun 30 16:09:04 EDT 2010
FreeBSD 8.1-RC1

Associated revisions

Revision 9cd5e6f5 (diff)
Added by Erik Fonnesbeck almost 9 years ago

Allow System: Throughput RRD graph to be displayed. Ticket #715

History

#1 Updated by Chris Buechler about 9 years ago

  • Target version set to 2.0

#2 Updated by Chris Buechler almost 9 years ago

  • Status changed from New to Closed

this was either fixed a while back or needs more info, not seeing this anywhere on current versions

#3 Updated by Steve Vigneau almost 9 years ago

What more info can I provide? I'm now running "2.0-BETA4 (i386) built on Mon Aug 23 05:05:44 EDT 2010" and it's still occuring. When I pick either the 'Throughput' or 'Allgraphs' option in RRD I just get a blank display. 'Allgraphs' works right, but doesn't display

I should also note that regardless of what option I pick on the System tab, the dropdown reverts to the name 'Allgraphs' even after selecting something like 'Processor'.

The attached screenshot shows what I see after selecting 'Throughput'. I am able to duplicate this on Chrome 5.0.375.127 (Official Build 55887) and Firefox 3.5.5. I have not tried IE.

#4 Updated by Chris Buechler almost 9 years ago

none of the graphs currently contain any info, that's a new issue that has another ticket open on it.

#5 Updated by Erik Fonnesbeck almost 9 years ago

This is actually a legitimate issue. I've traced the code and found why it does this. As far as I can tell, it has been this way for about a year and a half.

#6 Updated by Chris Buechler almost 9 years ago

  • Status changed from Closed to Feedback

Definitely hasn't been that way for a year and a half. All of our production 2.0 installs only stopped working when all the RRD graphs stopped working somewhere around early August roughly. setting back to feedback

#7 Updated by Erik Fonnesbeck almost 9 years ago

I'm referring to the System: Throughput graph specifically and no other, and I'm fairly sure this was posted only about that issue. The code that made it not display is from a March 2009 commit.

#8 Updated by Chris Buechler almost 9 years ago

  • Status changed from Feedback to New

Oh the throughput graph on System tab, I read it as the graphs on the Traffic tab.

#9 Updated by Erik Fonnesbeck almost 9 years ago

  • Status changed from New to Feedback

I've committed a fix for the original issue reported. Earlier, I also fixed the issue of 'Allgraphs' always showing as the selected option on the System tab even when it isn't the one that was selected.

#10 Updated by Steve Vigneau almost 9 years ago

Updated to "2.0-BETA4 (i386) built on Tue Aug 24 02:26:59 EDT 2010 FreeBSD 8.1-RELEASE" this morning, problems gone. Everything on the System tab of RRD Graphs now works as expected.

Thanks very much!

#11 Updated by Chris Buechler over 8 years ago

  • Status changed from Feedback to Resolved

#12 Updated by Overand IRC-Priv over 5 years ago

Just going to note here, I do not find this to be resolved in this corner case:

pfSense 2.0 on 32 bit (hardware).

That config backed up and saved. Fresh pfSense 2.1-RELEASE AMD64 installed (on a VM). Previous config loaded. "Traffic" RRD graph reports "nan" and is otherwise empty.

#13 Updated by Chris Buechler over 5 years ago

Overand: has absolutely nothing to do with this ticket, please post to the forum or list with more specifics.

Also available in: Atom PDF