Project

General

Profile

Bug #789

Bad racoon.conf generated.

Added by simon allen almost 9 years ago. Updated almost 9 years ago.

Status:
Closed
Priority:
Low
Assignee:
-
Category:
IPsec
Target version:
Start date:
08/02/2010
Due date:
% Done:

0%

Estimated time:
Affected Version:
2.0
Affected Architecture:

Description

When setting up a new IPSEC connection in the GUI, if 'Local Network' is set to 'LAN subnet', and if the LAN interface has no IP address associated with it (as in the case when it is a member of a bridge for example), then an invalid racoon.conf is generated with fatal error (parse error on sainfo line).

Probably in this circumstance (ie no LAN IP address) the GUI shouldn't allow LAN subnet to be selected at all?

Also additional validation required if a config.xml is loaded that specifies a LAN subnet when LAN has no IP address?

Workaround is simple - specify Local Network type as : Network, and specify the bridge's subnet.

History

#1 Updated by Chris Buechler almost 9 years ago

  • Category set to IPsec
  • Target version set to 2.0

#2 Updated by Jim Pingle almost 9 years ago

  • Status changed from New to Closed

Duplicated by #789 but since that has a more accurate title and commits (and is already set to Feedback), this one can be closed.

Also available in: Atom PDF