Bug #8061
closedLAN WAN Interfaces missing in Traffichshaper
0%
Description
In 2.3.5 LAN and WAN interface(s) are missing from the list.
see picture attached
If queues are deleted only way to get them back is via the wizard.
Files
Updated by W FM almost 7 years ago
firewall_shaper.php
Firewall / Traffic Shaper / By Interface
(sorry for the typo)
Updated by Jim Pingle almost 7 years ago
What type of interfaces are those (driver name)?
Perhaps they were supported by the shaper on older versions but they are not supported now.
Updated by W FM almost 7 years ago
em0@pci0:0:3:0: class=0x020000 card=0x10128086 chip=0x10108086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82546EB Gigabit Ethernet Controller (Copper)'
class = network
subclass = ethernet
Updated by W FM almost 7 years ago
on irc someone else had the same issue.
Also worth noting this is i386
Updated by W FM almost 7 years ago
Bridges and VLAN interfaces on LAN show up.
a spare interface on the same card shows up
It is just WAN interfaces and LAN that have no label / not listed.
Updated by Corey Boyle almost 7 years ago
I have the same issue. WAN is nfe0. LAN is em0.
Updated by Josh Chilcott over 6 years ago
I am also confirming this issue on 2.3.5 and now 2.3.5_p1.
We have 22 affected units and they are all using the igb driver. All are Supermicro SYS-5018A-FTN4 systems and we purchased multiple units through the pfSense® store in late 2015 and early 2016 as C2758 models.
Updated by Jim Pingle about 5 years ago
- Status changed from New to Resolved
These all appear to be old driver-specific instances of ALTQ support not being present for specific drivers at the time.