Project

General

Profile

Actions
Copy link

Bug #8446

closed

QinQ interfaces are assigned incorrectly

Added by Steve Wheeler about 6 years ago. Updated over 5 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
-
Category:
Interfaces
Target version:
2.4.4
Start date:
04/08/2018
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.4.3
Affected Architecture:
All

Description

When creating a QinQ interface in 2.4.3 it is stored in the config correctly and created as an interface as expected:

        <qinqentry>
            <if>em0</if>
            <tag>100</tag>
            <members>200</members>
            <descr><![CDATA[test wan]]></descr>
            <vlanif>em0.100</vlanif>
        </qinqentry>

em0.100.200: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
    options=28<VLAN_MTU,JUMBO_MTU>
    ether 00:90:7f:87:dc:75
    inet6 fe80::290:7fff:fe87:dc75%em0.100.200 prefixlen 64 scopeid 0x10
    nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
    media: Ethernet autoselect (1000baseT <full-duplex>)
    status: active

But when selecting that device to assign it in the GUI the resulting config is still using the old notation:

        <opt2>
            <descr><![CDATA[OPT2]]></descr>
            <if>em0.100_200</if>
            <enable></enable>
            <spoofmac></spoofmac>
        </opt2>

Which results in expected failure:

Apr 9 01:03:35    php-fpm    8969    /interfaces_assign.php: The command '/sbin/ifconfig 'em0.100_200' -staticarp ' returned exit code '1', the output was 'ifconfig: interface em0.100_200 does not exist'
Apr 9 01:03:35    php-fpm    8969    /interfaces_assign.php: The command '/usr/sbin/arp -d -i 'em0.100_200' -a > /dev/null 2>&1 ' returned exit code '1', the output was ''

That config updated correctly top the new notation and functioned but the GUI showed the parent interface only, see pic. Selecting the expected QinQ port broke the config.

Files

Selection_384.png (70.8 KB) Selection_384.png Steve Wheeler, 04/08/2018 07:34 PM
Actions
Copy link
 #2

Updated by Jim Pingle over 5 years ago

  • Target version set to 2.4.4
Actions
Copy link
 #3

Updated by Jim Pingle over 5 years ago

  • Status changed from New to Feedback

PR was merged earlier today.

Actions
Copy link
 #4

Updated by Steve Wheeler over 5 years ago

This looks good now:

    <qinqs>
        <qinqentry>
            <if>mvneta0</if>
            <tag>100</tag>
            <members>30</members>
            <descr><![CDATA[Test QinQ]]></descr>
            <vlanif>mvneta0.100</vlanif>
        </qinqentry>
    </qinqs>

        <opt5>
            <descr><![CDATA[QinQ]]></descr>
            <if>mvneta0.100.30</if>
            <enable></enable>
            <ipaddr>172.25.56.2</ipaddr>
            <subnet>24</subnet>
            <spoofmac></spoofmac>
        </opt5>

mvneta0.100: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
    options=80000<LINKSTATE>
    ether 00:08:a2:0c:0b:ba
    inet6 fe80::208:a2ff:fe0c:bba%mvneta0.100 prefixlen 64 scopeid 0x11
    groups: vlan
    vlan: 100 vlanpcp: 0 parent interface: mvneta0
    media: Ethernet autoselect (none)
    status: no carrier
    nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
mvneta0.100.30: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
    options=28<VLAN_MTU,JUMBO_MTU>
    ether 00:08:a2:0c:0b:ba
    inet6 fe80::208:a2ff:fe0c:bba%mvneta0.100.30 prefixlen 64 scopeid 0x12
    inet 172.25.56.2 netmask 0xffffff00 broadcast 172.25.56.255
    media: Ethernet autoselect (1000baseT <full-duplex>)
    status: active
    nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

01:23:41.890037 00:08:a2:0c:0b:ba > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 50: vlan 100, p 0, ethertype 802.1Q, vlan 30, p 0, ethertype ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 172.25.56.1 tell 172.25.56.2, length 28

The only anomaly I'm seeing is that the QinQ interface shows as UP with carrier even when the parent VLAN and it's parent NIC are down.

Actions
Copy link
 #5

Updated by Steve Wheeler over 5 years ago

  • Status changed from Feedback to Resolved
Actions
Copy link

Also available in: Atom PDF