pfSense

Jim Pingle wrote:

There was a similar problem in the past ( #1420 ) but this doesn't seem like quite the same issue.

Most likely not a new problem or a regression worthy of holding up the release, though. You can always fix it on the interface assignments page or via the console.

How to reproduce:
1) Create new (OPT2) pseudo-interface (l2tp for example) and link it to OPT1 interface (vtnet2 in my case);
2) Assign it on the Interfaces / Interface Assignments page;
3) Check 'Enable' and select 'L2TP' IPv4 Configuration Type. Apply;
4) Change IPv4 Configuration Type to 'Static IP', set IP and Apply;
5) Now it is assigned to vtnet2.

Now two interfaces, OPT1 and OPT2 are assigned to vtnet2