Project

General

Profile

Actions

Bug #10740

closed

Console menu shows static subnet for dhcp connections.

Added by Steve Wheeler over 1 year ago. Updated over 1 year ago.

Status:
Resolved
Priority:
Normal
Category:
Console Menu
Target version:
Start date:
07/08/2020
Due date:
% Done:

100%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.4.x
Affected Architecture:
All

Description

The interfaces list shown in the console will show a subnet value from the config file if it is present for a DHCP configured interface.
The config file value is not actually used by a DHCP interface which receives the subnet via DHCP. This does not affect function of the interface, the console just shows an incorrect value.
It will show any configured there. For example:

        <wan>
            <enable></enable>
            <if>mvneta0.4090</if>
            <ipaddr>dhcp</ipaddr>
            <ipaddrv6>dhcp6</ipaddrv6>
            <subnet>64</subnet>
            <gateway></gateway>
            <media></media>
            <mediaopt></mediaopt>
            <dhcp6-duid></dhcp6-duid>
            <dhcp6-ia-pd-len>0</dhcp6-ia-pd-len>
            <switchif>switch0.port3</switchif>
        </wan>

[2.4.5-RELEASE][admin@1100-2.stevew.lan]/root: ifconfig mvneta0.4090
mvneta0.4090: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
    options=3<RXCSUM,TXCSUM>
    ether f0:ad:4e:08:6b:df
    inet6 fe80::f2ad:4eff:fe08:6bdf%mvneta0.4090 prefixlen 64 scopeid 0xa
    inet 172.21.16.219 netmask 0xffffff00 broadcast 172.21.16.255
    groups: vlan
    vlan: 4090 vlanpcp: 0 parent interface: mvneta0
    media: Ethernet 1000baseT <full-duplex>
    status: active
    nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
*** Welcome to pfSense 2.4.5-RELEASE-p1 (arm64) on 1100-2 ***

 WAN (wan)       -> mvneta0.4090 -> v4/DHCP4: 172.21.16.219/64
 LAN (lan)       -> mvneta0.4091 -> v4: 192.168.219.1/24
 OPT (opt1)      -> mvneta0.4092 -> 
Actions

Also available in: Atom PDF