Feature #10816
closedAllow FRR BGP Neighbors to be active in both IPv4 and IPv6
0%
Description
BGP can carry routes for both IPv4 and IPv6 to a single neighbor of either type. Currently the code only activates the neighbor in the AF which matches the neighbor peer address AF.
Add a checkbox to activate the neighbor in both IPv4 and IPV6 unicast AFs.
Updated by Jim Pingle over 3 years ago
- Status changed from In Progress to Feedback
Updated by Alhusein Zawi over 3 years ago
it is working if the network(IPv6) added to "Networks to Distribute"
Updated by Alhusein Zawi over 3 years ago
it does not Redistribute connected networks(IPv6) and Kernel(IPv6) .
Updated by Jim Pingle over 3 years ago
This has nothing to do with networks to distribute or similar route controls. This only controls whether or not BGP will transmit IPv6 routes to an IPv4 peer or vice versa.
Updated by Azamat Khakimyanov over 3 years ago
- Status changed from Feedback to Resolved
Tested on 21.02-DEVELOPMENT (amd64)
built on Sat Jan 23 00:06:39 EST 2021
FreeBSD 12.2-STABLE
Checkbox "Address Family: Allow neighbor to advertise and receive routes for both IPv4 and IPv6" were added.
This feature request can be marked resolved.