Correction #11221
Feedback on pfSense Configuration Recipes — Routing Internet Traffic Through A Site-To-Site OpenVPN Tunnel
0%
Description
Page: https://docs.netgate.com/pfsense/en/latest/recipes/openvpn-s2s-route-internet-traffic.html
Feedback:
This Section:
https://docs.netgate.com/pfsense/en/latest/recipes/openvpn-s2s-route-internet-traffic.html#set-up-the-client-at-site-a
In the second picture ist an error:
picture shows:
IPv4 Remote Network: 192.168.10.0/24
This ist wrong.
Right is:
IPv4 Remote Network: 192.168.20.0/24
The table above shows this right option too.
History
#1
Updated by Michael Huck about 2 months ago
By the way:
Section:
https://docs.netgate.com/pfsense/en/latest/recipes/openvpn-s2s-route-internet-traffic.html#set-up-openvpn-at-site-b
content of the first table in this section:
wrong:
IPv4 Remote Network/s: 192.168.10.0
right:
IPv4 Remote Network/s: 192.168.10.0/24
#2
Updated by Marcos Mendoza about 2 months ago
FYI, many screenshots need to be updated. See:
https://redmine.pfsense.org/issues/9370