Correction #11221
closed
Feedback on pfSense Configuration Recipes — Routing Internet Traffic Through A Site-To-Site OpenVPN Tunnel
0%
Description
Page: https://docs.netgate.com/pfsense/en/latest/recipes/openvpn-s2s-route-internet-traffic.html
Feedback:
This Section:
https://docs.netgate.com/pfsense/en/latest/recipes/openvpn-s2s-route-internet-traffic.html#set-up-the-client-at-site-a
In the second picture ist an error:
picture shows:
IPv4 Remote Network: 192.168.10.0/24
This ist wrong.
Right is:
IPv4 Remote Network: 192.168.20.0/24
The table above shows this right option too.
Updated by Michael Huck almost 4 years ago
By the way:
Section:
https://docs.netgate.com/pfsense/en/latest/recipes/openvpn-s2s-route-internet-traffic.html#set-up-openvpn-at-site-b
content of the first table in this section:
wrong:
IPv4 Remote Network/s: 192.168.10.0
right:
IPv4 Remote Network/s: 192.168.10.0/24
Updated by Marcos M almost 4 years ago
FYI, many screenshots need to be updated. See:
https://redmine.pfsense.org/issues/9370
Updated by Jim Pingle about 3 years ago
- Status changed from New to Closed
I completely rewrote the doc because the vast majority of it was redundant, repeating things already covered by other recipes which also meant it had far too many opportunities to introduce inconsistencies and outdated information.
https://gitlab.netgate.com/docs/pfSense-docs/-/commit/1ae4da490b0e238f6ca4c3dd44880d4a74c0552b
The new copy will be made public along with the 22.01 release.
All of the outdated diagrams and screenshots related to this document have also been either updated or removed.