Bug #12712
closed
One of the reasons for the problem is that if many static routes are added to the settings, the pf2.6 system will crash.
For example, adding the ip list in the attachment to the system route will cause problems.
- Status changed from New to Not a Bug
- Priority changed from Very High to Normal
- Target version deleted (
2.6.0)
I can't replicate this at all, but your two files have numerous overlapping networks which is invalid. Input validation now rejects it but it may not have in the past.
129.226.0.0/16
140.143.0.0/16
140.179.0.0/16
140.205.0.0/16
140.206.0.0/15
140.210.0.0/16
140.224.0.0/16
140.237.0.0/16
140.240.0.0/16
140.242.223.0/24
140.242.224.0/24
140.243.0.0/16
140.246.0.0/16
140.249.0.0/16
140.250.0.0/16
140.255.0.0/16
140.75.0.0/16
203.55.2.0/23
203.55.4.0/24
210.32.0.0/12
210.51.0.0/16
210.52.0.0/15
210.82.0.0/15
211.136.0.0/13
216.228.126.0/24
Those networks are in both cn1.txt and cn2.txt, you can't have two routes to the same destination.
This is the result of ip aggregation. Duplicates should be removed.
Attachment file updated.
I can't replicate this either. Adding the static route works as expected. The routing table is updated.
Tested:
22.01-RC (amd64)
built on Sun Jan 23 01:50:24 UTC 2022
FreeBSD 12.3-STABLE
Supplementary note: The system environment has frr ipv6 bgp full route running.
pfsense 2.6 rc
Also available in: Atom
PDF