Bug #12763
closed
VTI gateway status stuck as "pending" after reboot
Added by Marcos M almost 3 years ago. Updated over 2 years ago.
100%
Description
After rebooting the firewall, VTI gateways stay pending until a restart of dpinger.
Updated by Marcos M almost 3 years ago
The icmp state does not exist indicating that dpinger failed in some way.
Updated by Jim Pingle almost 3 years ago
- Status changed from New to Feedback
I can't reproduce this here. My VTI gateways with monitoring enabled are up at boot on 22.01/2.6.0.
More information is required on exactly how to reproduce the problem or under which conditions it appears.
Updated by Marcos M almost 3 years ago
- Status changed from Feedback to New
Thanks for looking. I traced it down to using an FQDN (issue) vs IP (no issue) for the remote gateway. When using FQDN, I also notice the following in the system logs after reboot:
Feb 7 18:06:34 php 411 rc.bootup: Default gateway setting WAN1GW as default. Feb 7 18:06:34 php 411 rc.bootup: Gateway, none 'available' for inet6, use the first one configured. '' Feb 7 18:06:34 php 411 rc.bootup: route_add_or_change: Invalid gateway and/or network interface ipsec1 Feb 7 18:06:34 php 411 rc.bootup: route_add_or_change: Invalid gateway and/or network interface ipsec1 Feb 7 18:06:34 php 411 rc.bootup: route_add_or_change: Invalid gateway and/or network interface ipsec1
Updated by Jim Pingle almost 3 years ago
OK, that is likely because it doesn't have sufficient information to setup the interface at at that exact moment when the remote is an FQDN which requires DNS resolution.
That should narrow it down significantly, assuming there is a viable workaround.
Updated by Viktor Gurov over 2 years ago
- Assignee set to Viktor Gurov
- Target version set to 2.7.0
- Plus Target Version set to 22.05
- Affected Version set to 2.6.0
Updated by Jim Pingle over 2 years ago
- Status changed from New to Pull Request Review
Updated by Viktor Gurov over 2 years ago
- Status changed from Pull Request Review to Feedback
Updated by Jim Pingle over 2 years ago
- Subject changed from VTI gateway status is pending after rebooting the firewall to VTI gateway status stuck as "pending" after reboot
Updating subject for release notes.
Updated by Danilo Zrenjanin over 2 years ago
Tested the patch against the version below:
2.7.0-DEVELOPMENT (amd64) built on Sat Apr 16 06:18:29 UTC 2022 FreeBSD 12.3-STABLE
The gateways still stay stuck in Pending after reboot. Please check again.
Updated by Marcos M over 2 years ago
- Status changed from Feedback to Confirmed
Tested on 22.05.a.20220417.0600. The FQDN VTI gateway remains pending after reboot.
Updated by Viktor Gurov over 2 years ago
Marcos Mendoza wrote in #note-10:
Tested on
22.05.a.20220417.0600. The FQDN VTI gateway remains pending after reboot.
fix:
https://gitlab.netgate.com/pfSense/pfSense/-/merge_requests/727
Updated by Jim Pingle over 2 years ago
- Status changed from Confirmed to Pull Request Review
Updated by Viktor Gurov over 2 years ago
- Status changed from Pull Request Review to Feedback
- % Done changed from 0 to 100
Applied in changeset a41488ff8d8c7647dd93a20fb4d4e3ebd52c175f.
Updated by Marcos M over 2 years ago
- Status changed from Feedback to Resolved
Tested on 22.01 with both patches applied and on 22.05.a.20220419.0600 with the second patch applied. The FQDN gateway shows online after reboot in both cases.