Bug #13280
closed
Entries for ``net.link.ifqmaxlen`` duplicated in ``/boot/loader.conf``
0%
Description
Using 22.05-RC 22.05.r.20220617.0613 Duplicate entries appear in /boot/loader.conf
Here are the contents of my loader.conf file which I believe are default setttings.
kern.cam.boot_delay=10000 kern.ipc.nmbclusters="1000000" kern.ipc.nmbjumbop="524288" kern.ipc.nmbjumbo9="524288" opensolaris_load="YES" zfs_load="YES" kern.geom.label.gptid.enable="0" kern.geom.label.disk_ident.enable="0" net.link.ifqmaxlen="128" net.link.ifqmaxlen="128" autoboot_delay="3" hw.hn.vf_transparent="0" hw.hn.use_if_start="1" net.link.ifqmaxlen="128"
Duplicate entry net.link.ifqmaxlen="128" appears to be added to loader.conf everytime the system is booted.
Updated by Marcos M over 2 years ago
I'm seeing this as well on a VM with 22.05.r.20220609.1919.
kern.cam.boot_delay=10000 kern.ipc.nmbclusters="1000000" kern.ipc.nmbjumbop="524288" kern.ipc.nmbjumbo9="524288" opensolaris_load="YES" zfs_load="YES" kern.geom.label.gptid.enable="0" kern.geom.label.disk_ident.enable="0" kern.geom.label.disk_ident.enable="0" kern.geom.label.gptid.enable="0" opensolaris_load="YES" zfs_load="YES" net.link.ifqmaxlen="128" net.link.ifqmaxlen="128" net.link.ifqmaxlen="128" net.link.ifqmaxlen="128" net.link.ifqmaxlen="128" net.link.ifqmaxlen="128" net.link.ifqmaxlen="128" autoboot_delay="3" hw.hn.vf_transparent="0" hw.hn.use_if_start="1" net.link.ifqmaxlen="128"
Updated by Joe Mott over 2 years ago
I know this is probably a low priority bug since pfSense does not need to be rebooted frequently, but shouldn't this issue be assigned to a target version?
PHP is not my specialty, but the code does not appear to check for net.link.ifqmaxlen in loader.conf before adding it.
Updated by Jim Pingle over 2 years ago
- Subject changed from Entries duplicated in /boot/loader.conf to Entries for ``net.link.ifqmaxlen`` duplicated in ``/boot/loader.conf``
- Category changed from Unknown to Operating System
- Status changed from New to Confirmed
- Priority changed from Normal to High
- Target version set to 2.7.0
- Plus Target Version set to 22.11
Yes, it should have a target. It definitely needs addressed and should be possible to patch between releases if needed.
Updated by Jim Pingle about 2 years ago
- Plus Target Version changed from 22.11 to 23.01
Updated by Kristof Provost about 2 years ago
I cannot reproduce this on either CE (20221111) or Plus (of a similar vintage). Does this problem still occur on recent snapshots? If so, can you share a configuration file so I can attempt to reproduce again?
Updated by Jim Pingle almost 2 years ago
- Status changed from Confirmed to Feedback
I cannot reproduce this on current snapshots either. The only place I can reproduce it is on a 22.05 system.
I have multiple systems with one copy of that value in loader.conf, but none on snapshots with multiple.
If anyone can still reproduce this on a current dev snapshot, we'll need more information to go on.
Updated by Georgiy Tyutyunnik almost 2 years ago
Version 2.7.0-DEVELOPMENT (amd64)
built on Fri Dec 02 06:04:46 UTC 2022
FreeBSD 14.0-CURRENT
Hyper-V VMs
net.link.ifqmaxlen="128" parameter is not duplicating, but I see the following duplicated strings:
kern.geom.label.gptid.enable="0"
kern.geom.label.disk_ident.enable="0"
kern.geom.label.disk_ident.enable="0"
kern.geom.label.gptid.enable="0"
They do not multiplicate through the reboot. Is it relevant to the current issue?
Updated by Jim Pingle almost 2 years ago
- Status changed from Feedback to Resolved
No, those are unrelated. They are added during the process that builds the images and are left as-is in the file, they aren't manipulated by the pfSense code.
Marking this resolved. If anyone can still reproduce it, we can always open it back up.