Bug #13344
closed
Vlan loses parent interface when changing LAGG mtu to jumbo frames
0%
Description
Hi,
Psense+ version: 22.01
When I try to add jumbo frames to lagg interface ( 9000 ) - main
When I change the main interface enabled with no ip address the vlans configured under the lagg instantly lose their parent device.
lagg1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000
description: LAGG1
ifconfig lagg1.115|grep vlan
groups: vlan
vlan: 0 vlanpcp: 0 parent interface: <none>
How am I suppose to enable jumbo frames on a aggregated link without losing vlan device links?
Also how to keep it persistent from the gui without doing hacks during bootup.
Files
Related issues
Updated by Alhusein Zawi almost 2 years ago
it appears with 22.05 too.
to workaround :
re-save the Lagg interface Interfaces>LAGGs
after resaving:
lagg0.100: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000
options=3<RXCSUM,TXCSUM>
ifconfig lagg0.100|grep vlan
groups: vlan
vlan: 100 vlanpcp: 0 parent interface: lagg0
22.05-RELEASE (amd64)
built on Wed Jun 22 18:56:13 UTC 2022
FreeBSD 12.3-STABLE
Updated by Jordan G about 1 year ago
Matthew Whittaker-Williams wrote:
When I try to add jumbo frames to lagg interface ( 9000 ) - main
When I change the main interface enabled with no ip address the vlans configured under the lagg instantly lose their parent device.
Same behavior in 22.05, saving the (parent) interface with with IPv4/6 set to none and MTU 9000 kills connectivity on any VLANs on the LAGG. Reverting config and reboot/reroot restores connectivity. Config corrected, saving/applying interfaces and resetting states did not restore connectivity to sub-interfaces.
Updated by Jordan G 9 months ago
related/duplicate? https://redmine.pfsense.org/issues/14603
Updated by 