Added by Chris Linstruth over 1 year ago. Updated over 1 year ago.
100%
Description
/var/etc/syslog.d empty. Nothing is being logged to /var/log files.
Possibly related to #13446 src/etc/inc/syslog.inc#L216
Updated by Jim Pingle over 1 year ago
In source:src/etc/inc/syslog.inc#L216 it checks for an empty syslog section which isn't really a valid test. Before the change in #13446 it checked if the section was there, not if it was empty. But even that test wasn't really valid. As a result if the section is not there, or if it's empty, then /var/etc/syslog.d/pfSense.conf is not written, so nothing is logged.
Having no settings should be the same as the default settings, which should still setup the logs.
Some care will be needed to ensure the $syslogcfg variable is at least an array if it's empty, and that any options inside that array are accessed safety.
Updated by Jim Pingle over 1 year ago
Applied in changeset 11d14d628f333ed9b856a68630bfffa635de44f4.
Updated by Jim Pingle over 1 year ago
The code in this area is slightly different in plus which makes generating a patch more difficult. In the interest of minimizing changes to older systems, this diff should apply against 23.01 and have the correct net effect without being as nice/proper a fix as what I committed for 23.05/2.7.0.
diff --git a/src/etc/inc/syslog.inc b/src/etc/inc/syslog.inc
index feced73bd3..dd875cfd6d 100644
--- a/src/etc/inc/syslog.inc
+++ b/src/etc/inc/syslog.inc
@@ -217,7 +217,7 @@ EOD;
safe_mkdir("{$g['varetc_path']}/syslog.d");
$syslogd_extra = "";
- if (!empty($syslogcfg)) {
+ if (true) {
$separatelogfacilities = array('ntp', 'ntpd', 'ntpdate', 'charon', 'ipsec_starter', 'openvpn', 'poes', 'l2tps', 'hostapd', 'dnsmasq', 'named', 'filterdns', 'unbound', 'dhcpd', 'dhcrelay', 'dhclient', 'dhcp6c', 'dpinger', 'radvd', 'routed', 'zebra', 'ospfd', 'ospf6d', 'bgpd', 'watchfrr', 'miniupnpd', 'igmpproxy', 'filterlog');
if (watchdogd_enabled()) {
array_push($separatelogfacilities, 'watchdogd');
Also as a workaround, visiting the system log settings and pressing Save without changing anything would also fix the original issue, as that would define the syslog section of the config with content sufficient it would pass the original test.
Updated by Danilo Zrenjanin over 1 year ago
Tested the diff against:
23.01-RELEASE (amd64) built on Fri Feb 10 20:06:33 UTC 2023 FreeBSD 14.0-CURRENT
It fixes the issue. I am marking this ticket resolved.