Regression #15024: Invalid outbound NAT rules break the following rule - pfSense - pfSense bugtracker

Actions

Copy link

Regression #15024

closed

Invalid outbound NAT rules break the following rule

Added by Steve Wheeler about 1 year ago. Updated 12 months ago.

Status:

Resolved

Priority:

Normal

Assignee:

Marcos M

Category:

Rules / NAT

Target version:

2.7.2

Start date:

Due date:

% Done:

100%

Estimated time:

Plus Target Version:

23.09.1

Release Notes:

Default

Affected Version:

2.7.1

Affected Architecture:

All

Description

Manual outbound NAT rules are commented out in the ruleset if they are invalid such as when he interface is disabled:

# Missing interface 'opt1' for rule 'Test'

However in 2.7.1 the following rule runs on immediately omitting it from the rules:

# Missing interface 'opt1' for rule 'Test'nat on $SWITCH inet proto tcp from $OPT3__NETWORK to any -> 192.168.70.1/32 port 443  # Test2

Actions

Copy link

Updated by Steve Wheeler about 1 year ago

In my test case the rule is added twice:

# Outbound NAT rules (manual)
nat on $SWITCH inet from 172.21.16.0/24 to 192.168.1.0/24 -> 192.168.70.1/32 port 1024:65535  # Temp AP access
nat on $SWITCH inet from 172.21.16.0/24 to 10.232.209.0/24 -> 10.232.209.10/32 port 1024:65535  # Temp AP access
# Missing interface 'opt1' for rule 'Test'nat on $SWITCH inet proto tcp from $OPT3__NETWORK to any -> 192.168.70.1/32 port 443  # Test2
nat on $SWITCH inet6 proto tcp from $OPT3__NETWORK to any -> (igb3) port 443  # Test2

But is not for other reported cases:
https://forum.netgate.com/topic/184251/routing-interface-gateway-issues-after-updating-from-ce-2-7-2-71/

Actions

Copy link

Updated by Jim Pingle about 1 year ago

Plus Target Version set to 24.03

Actions

Copy link

Updated by Marcos M about 1 year ago

Status changed from New to Feedback
% Done changed from 0 to 100

Applied in changeset b7f2b1dc3f0c15c4b2b9d475848f42573c43e261.

Actions

Copy link

Updated by Steve Wheeler about 1 year ago

Patch looks good:

# Outbound NAT rules (manual)
nat on $SWITCH inet from 172.21.16.0/24 to 192.168.1.0/24 -> 192.168.70.1/32 port 1024:65535  # Temp AP access
nat on $SWITCH inet from 172.21.16.0/24 to 10.232.209.0/24 -> 10.232.209.10/32 port 1024:65535  # Temp AP access
# Missing interface 'opt1' for rule 'Test'
nat on $SWITCH inet proto tcp from $OPT3__NETWORK to any -> 192.168.70.1/32 port 443  # Test2
nat on $SWITCH inet6 proto tcp from $OPT3__NETWORK to any -> (igb3) port 443  # Test2

Actions

Copy link