Project

General

Profile

Actions
Copy link

Regression #15112

closed

``status_interfaces.php`` is missing several values for SFP modules

Added by Chad Wagner 5 months ago. Updated 2 months ago.

Status:
Resolved
Priority:
Normal
Assignee:
Jim Pingle
Category:
Web Interface
Target version:
2.8.0
Start date:
Due date:
% Done:

100%

Estimated time:
Plus Target Version:
24.03
Release Notes:
Default
Affected Version:
Affected Architecture:
All

Description

I am not seeing the SFP module status in pfSense 23.09.1 that was implemented previously. Reference https://redmine.pfsense.org/issues/8861.

ifconfig -v shows that my 10GTek modules are providing the additional information. I just switched from DAC to fiber a few days ago so I am not exactly sure when the regression may have occurred.

output from ifconfig -v on my Netgate 6100

ix0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
description: WAN
options=4e138bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6,HWSTATS,MEXTPG>
ether 90:ec:77:29:83:68
inet xx.xx.xx.xx netmask 0xffffff00 broadcast xx.xx.xx.xx
inet6 fe80::92ec:77ff:fe29:8368%ix0 prefixlen 64 scopeid 0x5
media: Ethernet autoselect (10Gbase-SR <full-duplex>)
status: active
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
plugged: SFP/SFP+/SFP28 10G Base-SR (LC)
vendor: OEM PN: SFP-10G-SR SN: xxxxxxxxxxx DATE: 2023-09-07
module temperature: 44.00 C voltage: 3.41 Volts
lane 1: RX power: 0.56 mW (-2.53 dBm) TX bias: 6.07 mA

Interface Status Page:

Files

Download all files
clipboard-202312221002-2by4n.png (79.6 KB) clipboard-202312221002-2by4n.png Chad Wagner, 12/22/2023 06:02 PM
clipboard-202401131150-fmqvr.png (102 KB) clipboard-202401131150-fmqvr.png Lev Prokofev, 01/13/2024 07:50 AM
clipboard-202403051514-kljnr.png (73.5 KB) clipboard-202403051514-kljnr.png Jim Pingle, 03/05/2024 08:14 PM
Actions
Copy link

Also available in: Atom PDF