Project

General

Profile

Actions
Copy link

Regression #15112

closed

``status_interfaces.php`` is missing several values for SFP modules

Added by Chad Wagner 11 months ago. Updated 9 months ago.

Status:
Resolved
Priority:
Normal
Assignee:
Jim Pingle
Category:
Web Interface
Target version:
2.8.0
Start date:
Due date:
% Done:

100%

Estimated time:
Plus Target Version:
24.03
Release Notes:
Default
Affected Version:
Affected Architecture:
All

Description

I am not seeing the SFP module status in pfSense 23.09.1 that was implemented previously. Reference https://redmine.pfsense.org/issues/8861.

ifconfig -v shows that my 10GTek modules are providing the additional information. I just switched from DAC to fiber a few days ago so I am not exactly sure when the regression may have occurred.

output from ifconfig -v on my Netgate 6100

ix0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
description: WAN
options=4e138bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6,HWSTATS,MEXTPG>
ether 90:ec:77:29:83:68
inet xx.xx.xx.xx netmask 0xffffff00 broadcast xx.xx.xx.xx
inet6 fe80::92ec:77ff:fe29:8368%ix0 prefixlen 64 scopeid 0x5
media: Ethernet autoselect (10Gbase-SR <full-duplex>)
status: active
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
plugged: SFP/SFP+/SFP28 10G Base-SR (LC)
vendor: OEM PN: SFP-10G-SR SN: xxxxxxxxxxx DATE: 2023-09-07
module temperature: 44.00 C voltage: 3.41 Volts
lane 1: RX power: 0.56 mW (-2.53 dBm) TX bias: 6.07 mA

Interface Status Page:

Files

Download all files
clipboard-202312221002-2by4n.png (79.6 KB) clipboard-202312221002-2by4n.png Chad Wagner, 12/22/2023 06:02 PM
clipboard-202401131150-fmqvr.png (102 KB) clipboard-202401131150-fmqvr.png Lev Prokofev, 01/13/2024 07:50 AM
clipboard-202403051514-kljnr.png (73.5 KB) clipboard-202403051514-kljnr.png Jim Pingle, 03/05/2024 08:14 PM
Actions
Copy link
 #1

Updated by Steve Wheeler 11 months ago

  • Category changed from Interfaces to Web Interface
  • Target version set to 2.8.0
  • Plus Target Version set to 24.03
  • Affected Architecture All added
Actions
Copy link
 #2

Updated by Lev Prokofev 11 months ago

Can confirm this behavior since 23.01

[23.01-RELEASE][root@pfSense.home.arpa]/root: ifconfig -v ix1
ix1: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: WAN4
        options=4e138bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
        ether 90:ec:77:88:ef:d2
        inet6 fe80::92ec:77ff:fe88:efd2%ix1 prefixlen 64 scopeid 0x6
        media: Ethernet autoselect (10Gbase-LR <full-duplex,rxpause,txpause>)
        status: active
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        plugged: SFP/SFP+/SFP28 10G Base-LR (LC)
        vendor: BROCADE PN: 57-0000076-01 SN: M1204160289 DATE: 2011-03-02
        module temperature: 58.78 C voltage: 3.31 Volts
        lane 1: RX power: 0.50 mW (-2.97 dBm) TX bias: 6.74 mA
[23.01-RELEASE][root@pfSense.home.arpa]/root: ifconfig -v ix0
ix0: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: WAN3
        options=4e138bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
        ether 90:ec:77:88:ef:d1
        inet6 fe80::92ec:77ff:fe88:efd1%ix0 prefixlen 64 scopeid 0x5
        media: Ethernet autoselect
        status: no carrier
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        plugged: SFP/SFP+/SFP28 10G Base-SR (LC)
        vendor: Intel Corp PN: AFBR-703SDZ-IN2 SN: AA1127A4C2J DATE: 2011-07-11
        module temperature: 50.92 C voltage: 3.31 Volts
        lane 1: RX power: 0.00 mW (-inf dBm) TX bias: 45.83 mA
Actions
Copy link
 #3

Updated by Jim Pingle 9 months ago

  • Assignee set to Jim Pingle
Actions
Copy link
 #4

Updated by Jim Pingle 9 months ago

  • Subject changed from Regression | Show SFP module details on ``status_interfaces.php`` to ``status_interfaces.php`` is missing several values for SFP modules
Actions
Copy link
 #5

Updated by Jim Pingle 9 months ago

  • Status changed from New to Feedback
  • % Done changed from 0 to 100
Actions
Copy link
 #6

Updated by Jim Pingle 9 months ago

Looks good on a current snapshot.

: ifconfig -v ix0
ix0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
    description: WAN2_10G
    options=48138b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,HWSTATS,MEXTPG>
    ether 00:08:a2:xx:xx:xx
    inet 10.15.30.1 netmask 0xffffff00 broadcast 10.15.30.255
    inet6 fe80::208:a2ff:x:x%ix0 prefixlen 64 scopeid 0x1
    media: Ethernet autoselect (10Gbase-SR <full-duplex,rxpause,txpause>)
    status: active
    nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
    drivername: ix0
    plugged: SFP/SFP+/SFP28 10G Base-SR (LC)
    vendor: FS PN: SFP-10GSR-85 SN: xxxx DATE: 2020-10-07
    module temperature: 47.36 C voltage: 3.33 Volts
    lane 1: RX power: 0.58 mW (-2.37 dBm) TX bias: 6.34 mA
Actions
Copy link

Also available in: Atom PDF