Project

General

Profile

Actions
Copy link

New Content #15315

closed

m2dev adjustment when adding an SSD drive into SG-3100

Added by Danilo Zrenjanin about 1 year ago. Updated about 1 year ago.

Status:
Rejected
Priority:
Normal
Assignee:
-
Category:
Hardware
Target version:
-
Start date:
Due date:
% Done:

0%

Estimated time:

Description

After adding an SSD drive, it may be necessary to adjust the m2dev setting to either 1 or 0. It would be beneficial to include this procedure in the existing M.2 SATA Installation documentation page.

https://docs.netgate.com/pfsense/en/latest/solutions/sg-3100/m-2-sata-installation.html

Actions
Copy link
 #1

Updated by Jim Pingle about 1 year ago

  • Status changed from New to Rejected
Actions
Copy link
 #2

Updated by Danilo Zrenjanin about 1 year ago

I had a customer whose SG-3100 couldn't boot from SSD until we changed m2dev to 1.

Prior to the change, the system failed to boot with the following logs:

Error: SCSI Controller(s) 1B4B:9215 1B4B:9235 not found
scanning bus for devices...
  Device 0: (0:0) Vendor: ATA Prod.: SAMSUNG SSD PM87 Rev: MVT2
            Type: Hard Disk
            Capacity: 244198.3 MB = 238.4 GB (500118192 x 512)
Found 1 device(s).
** Unrecognized filesystem type **
## Starting application at 0x00200000

Ticket ID #2449521051

Actions
Copy link

Also available in: Atom PDF