Project

General

Profile

Actions
Copy link

Bug #16176

open

Config restored during install can be overwitten by hardware specific default values

Added by Steve Wheeler 29 days ago. Updated about 23 hours ago.

Status:
Feedback
Priority:
Normal
Assignee:
Reid Linnemann
Category:
Installer
Target version:
25.07
Start date:
Due date:
% Done:

0%

Estimated time:
Release Notes:
Default
Affected Plus Version:
25.03
Affected Architecture:

Description

When installing using the Net Installer an config existing config can be selected to use in the resulting install.

Parts of that config can be overwritten at first boot by the model specific default values despite the 'installer_copied_config' file being set correctly.

For example on a 6100 all interfaces are set to the default values except WAN and LAN:

@@ -118,49 +117,43 @@
             <ipaddrv6>track6</ipaddrv6>
             <track6-interface>wan</track6-interface>
             <track6-prefix-id>0</track6-prefix-id>
-            <spoofmac/>
+            <spoofmac></spoofmac>
         </lan>
         <opt1>
-            <enable/>
+            <enable></enable>
             <if>ix2</if>
-            <descr><![CDATA[WAN2_TEST]]></descr>
-            <spoofmac/>
+            <descr><![CDATA[WAN2]]></descr>
         </opt1>
         <opt2>
-            <enable/>
+            <enable></enable>
             <if>ix0</if>
-            <descr><![CDATA[WAN3_TEST]]></descr>
-            <spoofmac/>
+            <descr><![CDATA[WAN3]]></descr>
         </opt2>
         <opt3>
-            <enable/>
+            <enable></enable>
             <if>ix1</if>
-            <descr><![CDATA[WAN4_TEST]]></descr>
-            <spoofmac/>
+            <descr><![CDATA[WAN4]]></descr>
         </opt3>
         <opt4>
-            <enable/>
+            <enable></enable>
             <if>igc1</if>
-            <descr><![CDATA[LAN2_TEST]]></descr>
-            <spoofmac/>
+            <descr><![CDATA[LAN2]]></descr>
         </opt4>
         <opt5>
-            <enable/>
+            <enable></enable>
             <if>igc2</if>
-            <descr><![CDATA[LAN3_TEST]]></descr>
-            <spoofmac/>
+            <descr><![CDATA[LAN3]]></descr>
         </opt5>
         <opt6>
-            <enable/>
+            <enable></enable>
             <if>igc3</if>
-            <descr><![CDATA[LAN4_TEST]]></descr>
-            <spoofmac/>
+            <descr><![CDATA[LAN4]]></descr>
         </opt6>
     </interfaces>
-    <staticroutes/>
+    <staticroutes></staticroutes>
     <dhcpd>
         <lan>
-            <enable/>
+            <enable></enable>
             <range>
                 <from>192.168.23.10</from>
                 <to>192.168.23.245</to>


-        <time>1746215166</time>
-        <description><![CDATA[admin@172.21.16.8 (Local Database): Interfaces settings changed]]></description>
-        <username><![CDATA[admin@172.21.16.8 (Local Database)]]></username>
+        <time>1746217525</time>
+        <description><![CDATA[(system): Default hardware detection on first boot]]></description>
+        <username><![CDATA[(system)]]></username>
Actions
Copy link

Also available in: Atom PDF