Project

General

Profile

Actions
Copy link

Bug #2234

open

Status: Traffic Graph - only shows interface's subnet

Added by Anonymous over 12 years ago. Updated almost 3 years ago.

Status:
Confirmed
Priority:
Low
Assignee:
-
Category:
Web Interface
Target version:
-
Start date:
02/24/2012
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
All
Affected Architecture:
All

Description

The Traffic Graph in Status menu does not show the aliased IP subnet addresses in the right panel list.
It shows only the WAN/LAN interfaces IP subnets.

Actions
Copy link
 #1

Updated by Jim Pingle over 12 years ago

  • Priority changed from Normal to Low

The rate command that builds the data for that only supports showing one subnet at a time. So if it will display other subnets, that would require a drop-down menu to select the subnet to show.

Actions
Copy link
 #2

Updated by Chris Buechler almost 9 years ago

  • Category set to Web Interface
Actions
Copy link
 #3

Updated by Chris Buechler over 8 years ago

  • Subject changed from Status: Traffic Graph - Do not show aliased IP addresses to Status: Traffic Graph - only shows interface's subnet
  • Status changed from New to Confirmed
  • Affected Version changed from 2.0.1 to All
Actions
Copy link
 #4

Updated by Kris Phillips almost 3 years ago

Generally speaking, having multiple subnets on the same L2 broadcast domain is not common or best practice. Splitting subnets out by VLANs is a much better solution. This issue would be extremely rare for anyone to hit.

Actions
Copy link

Also available in: Atom PDF