Project

General

Profile

Actions

Bug #2641

closed

mac spoof on wan (pppoe) doesnt spoof

Added by Bipin Chandra over 11 years ago. Updated about 11 years ago.

Status:
Resolved
Priority:
Normal
Category:
Interfaces
Target version:
Start date:
09/23/2012
Due date:
% Done:

100%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.1
Affected Architecture:

Description

i have a pppoe connection and my isp requires to spoof a fixed mac but it doesnt seem to work on latest nanobsd alix snapshot

Actions #1

Updated by Chris Buechler over 11 years ago

  • Category set to Interfaces
  • Priority changed from High to Normal
Actions #2

Updated by Renato Botelho about 11 years ago

  • Assignee set to Renato Botelho
Actions #3

Updated by Bipin Chandra about 11 years ago

this was discussed some time back on this link http://forum.pfsense.org/index.php/topic,53940.0.html

Actions #4

Updated by Renato Botelho about 11 years ago

  • Status changed from New to Feedback
  • % Done changed from 0 to 100
Actions #5

Updated by Bipin Chandra about 11 years ago

with this patch will i be able to spoof mac or is it removed only?

Actions #6

Updated by Renato Botelho about 11 years ago

You will be able to spoof mac. Please let me know the results of your tests, it worked fine for me.

Actions #7

Updated by Bipin Chandra about 11 years ago

yes it worked but as i mentioned in the forum, 2 things need to be done, when u apply the new mac id, the itnerface from the ppp link gets lost so it needs to be reassigned so probably that needs a patch so u dont have to go around doing it manually and also put up a note saying to restart the box when mac spoof is used coz without a reboot it doesnt apply

Actions #10

Updated by Bipin Chandra about 11 years ago

tried, it works well but some issues. after i enter a spoofed mac id, it gets implemented and pppoe reconnects and uses the new mac id and everything well but once i goto that spoofed mac id field and remove it and apply again, pppoe reconnects but under ppp tab etc it still keeps showing the spoofed mac id, not the original one, now i tried to do a trace from console to see what amc id its suing for the new connection but wasnt able to as my console hangs, this happens to me a couple of times when i see AT OK in console randomly, so i wasnt able to see is the original mac id being used or no but after a reboot the gui starts showing the original mac id so it might just be a gui bug but in general mac spoof works fine now, thanks

Actions #11

Updated by Chris Buechler about 11 years ago

there's no way to revert a spoofed MAC short of rebooting (with PPP or anything else), the original MAC is gone once you set one. I presume it's back to its hardware MAC after rebooting?

Actions #12

Updated by Bipin Chandra about 11 years ago

if thats the case then it works fine, u can close this bug.
one more thing i noticed not related to this issue but just wan config, noticed this when i was trying the mac spoof, i have dial on demand ticked and the box under it says idle timeout which defaults to 0 but that value is never saved so every time u make changes in the config u need to type 0 in that box to be able to save other changes or else u keep getting the error message prompting to put in some value

Actions #13

Updated by Chris Buechler about 11 years ago

  • Status changed from Feedback to Resolved
Actions #14

Updated by Bipin Chandra about 11 years ago

this ticket needs to be opened again as mac spoofing when working with vlans stopped working, ill try without vlans to see if that also broke or no

Actions

Also available in: Atom PDF