Project

General

Profile

Actions

Bug #3745

closed

VLANs are not ALTQ capable on 2.2 (missing patches?)

Added by Jim Pingle over 9 years ago. Updated over 9 years ago.

Status:
Resolved
Priority:
High
Assignee:
Ermal Luçi
Category:
Traffic Shaper (ALTQ)
Target version:
Start date:
07/07/2014
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.2
Affected Architecture:
All

Description

Trying to enable traffic shaping on VLANs with 2.2 does not work. The GUI allows them to be selected but pf generates an error:

php-fpm[92765]: /rc.filter_configure_sync: New alert found: There were error(s) loading the rules: pfctl: em1_vlan100: driver does not support altq - The line in question reads [0]:

The patch to activate ALTQ for VLANs may be missing or broken.

Actions #1

Updated by Renato Botelho over 9 years ago

  • Status changed from New to Feedback

Added the missing patch, should be fine on next snapshots

Actions #2

Updated by Raul Ramos over 9 years ago

No traffic on em1_Vlan10 or em1_vlan200. I have traffic on em1. No shaping enabled in this interfaces.
Snapshot: Wed Jul 09 01:13:21 CDT 2014.

Pinging from console to a local web server give me "ping: sendto: No buffer space available"

Actions #3

Updated by Jim Pingle over 9 years ago

  • Status changed from Feedback to New
Actions #4

Updated by Jim Thompson over 9 years ago

  • Assignee set to Ermal Luçi
  • Priority changed from Normal to High
Actions #5

Updated by Kirk Lane over 9 years ago

Just updated a pfSense 2.1 box to 2.2 (amd64-20140816-1530 for the specific snapshot) and I'm getting this error too if I try to use VLANs in the traffic shaper:

php-fpm[5142]: /rc.filter_configure_sync: New alert found: There were error(s) loading the rules: pfctl: bce0_vlan3: driver does not support altq - The line in question reads [0]:

Same VLANs / interfaces worked fine in 2.1.

Actions #6

Updated by Ermal Luçi over 9 years ago

  • Status changed from New to Feedback

Yup sorry the patch was not being included in the builds.

Try next coming snapshots.

Actions #7

Updated by Kirk Lane over 9 years ago

Yep, that did it. Updated to amd64-20140820-1305 and I can now have VLANs and traffic shaping working at the same time. Thanks!

Actions #8

Updated by Renato Botelho over 9 years ago

  • Status changed from Feedback to Resolved
Actions

Also available in: Atom PDF