Bug #4527
closedAPU BIOS bug can make interfaces disappear after warm reboot
0%
Description
I have an APU with an atheros wireless card.
When doing an update from 2.2.0 to 2.2.1 this morning, the reboot stopped because it couldn't find the wireless card ath0.
This device also connects using PPPoE so that config was blown away by interface reassignment.
Easy enough to reconfigure, but if I'd been doing it remotely, would have killed access to the firewall.
___ ___/ f \ / p \___/ Sense \___/ \ \___/ Welcome to pfSense 2.2.1-RELEASE ... No core dumps found. Creating symlinks......ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/lob 32-bit compatibility ldconfig path: /usr/lib32 done. External config loader 1.0 is now starting... Launching the init system... done. Initializing...................... done. Starting device manager (devd)...done. Loading configuration......done. Warning: Configuration references interfaces that do not exist: ath0 Network interface mismatch -- Running interface assignment option. re0: link state changed to DOWN re1: link state changed to DOWN re2: link state changed to DOWN Valid interfaces are: re0 00:0d:b9:35:29:c4 (up) RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit re1 00:0d:b9:35:29:c5 (up) RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit re2 00:0d:b9:35:29:c6 (up) RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Do you want to set up VLANs first? If you are not going to use VLANs, or only for optional interfaces, you should say no here and use the webConfigurator to configure VLANs later, if required. Do you want to set up VLANs now [y|n]? re0: link state changed to UP re1: link state changed to UP
What other details can I supply to help identify this?
I suggest the interface reassignment checks to see if the missing interface is "important", ie if its a WAN interface, before jumping to reassignment. Or simply ignore the missing interface and configure as much as possible.
[2.2.1-RELEASE][root@pfSense.criggie.org.nz]/root: dmesg | grep eth -i re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x1 re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x2 re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x3 pci4: <network, ethernet> at device 0.0 (no driver attached) [2.2.1-RELEASE][root@pfSense.criggie.org.nz]/root: pciconf -l hostb0@pci0:0:0:0: class=0x060000 card=0x15101022 chip=0x15101022 rev=0x00 hdr=0x00 pcib1@pci0:0:4:0: class=0x060400 card=0x12341022 chip=0x15121022 rev=0x00 hdr=0x01 pcib2@pci0:0:5:0: class=0x060400 card=0x12341022 chip=0x15131022 rev=0x00 hdr=0x01 pcib3@pci0:0:6:0: class=0x060400 card=0x12341022 chip=0x15141022 rev=0x00 hdr=0x01 pcib4@pci0:0:7:0: class=0x060400 card=0x12341022 chip=0x15151022 rev=0x00 hdr=0x01 ahci0@pci0:0:17:0: class=0x010601 card=0x43911002 chip=0x43911002 rev=0x40 hdr=0x00 ohci0@pci0:0:18:0: class=0x0c0310 card=0x43971002 chip=0x43971002 rev=0x00 hdr=0x00 ehci0@pci0:0:18:2: class=0x0c0320 card=0x43961002 chip=0x43961002 rev=0x00 hdr=0x00 ohci1@pci0:0:19:0: class=0x0c0310 card=0x43971002 chip=0x43971002 rev=0x00 hdr=0x00 ehci1@pci0:0:19:2: class=0x0c0320 card=0x43961002 chip=0x43961002 rev=0x00 hdr=0x00 none0@pci0:0:20:0: class=0x0c0500 card=0x15101022 chip=0x43851002 rev=0x42 hdr=0x00 isab0@pci0:0:20:3: class=0x060100 card=0x439d1002 chip=0x439d1002 rev=0x40 hdr=0x00 pcib5@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x40 hdr=0x01 ohci2@pci0:0:20:5: class=0x0c0310 card=0x43991002 chip=0x43991002 rev=0x00 hdr=0x00 pcib6@pci0:0:21:0: class=0x060400 card=0x00001002 chip=0x43a01002 rev=0x00 hdr=0x01 ohci3@pci0:0:22:0: class=0x0c0310 card=0x43971002 chip=0x43971002 rev=0x00 hdr=0x00 ehci2@pci0:0:22:2: class=0x0c0320 card=0x43961002 chip=0x43961002 rev=0x00 hdr=0x00 hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x17001022 rev=0x43 hdr=0x00 hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x17011022 rev=0x00 hdr=0x00 hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x17021022 rev=0x00 hdr=0x00 hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x17031022 rev=0x00 hdr=0x00 hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x17041022 rev=0x00 hdr=0x00 hostb6@pci0:0:24:5: class=0x060000 card=0x00000000 chip=0x17181022 rev=0x00 hdr=0x00 hostb7@pci0:0:24:6: class=0x060000 card=0x00000000 chip=0x17161022 rev=0x00 hdr=0x00 hostb8@pci0:0:24:7: class=0x060000 card=0x00000000 chip=0x17191022 rev=0x00 hdr=0x00 re0@pci0:1:0:0: class=0x020000 card=0x012310ec chip=0x816810ec rev=0x06 hdr=0x00 re1@pci0:2:0:0: class=0x020000 card=0x012310ec chip=0x816810ec rev=0x06 hdr=0x00 re2@pci0:3:0:0: class=0x020000 card=0x012310ec chip=0x816810ec rev=0x06 hdr=0x00 none1@pci0:4:0:0: class=0x020000 card=0x00000000 chip=0xff1c168c rev=0x01 hdr=0x00 [2.2.1-RELEASE][root@pfSense.criggie.org.nz]/root: pciconf -l -v hostb0@pci0:0:0:0: class=0x060000 card=0x15101022 chip=0x15101022 rev=0x00 hdr=0x00 class = bridge subclass = HOST-PCI pcib1@pci0:0:4:0: class=0x060400 card=0x12341022 chip=0x15121022 rev=0x00 hdr=0x01 class = bridge subclass = PCI-PCI pcib2@pci0:0:5:0: class=0x060400 card=0x12341022 chip=0x15131022 rev=0x00 hdr=0x01 class = bridge subclass = PCI-PCI pcib3@pci0:0:6:0: class=0x060400 card=0x12341022 chip=0x15141022 rev=0x00 hdr=0x01 class = bridge subclass = PCI-PCI pcib4@pci0:0:7:0: class=0x060400 card=0x12341022 chip=0x15151022 rev=0x00 hdr=0x01 class = bridge subclass = PCI-PCI ahci0@pci0:0:17:0: class=0x010601 card=0x43911002 chip=0x43911002 rev=0x40 hdr=0x00 class = mass storage subclass = SATA ohci0@pci0:0:18:0: class=0x0c0310 card=0x43971002 chip=0x43971002 rev=0x00 hdr=0x00 class = serial bus subclass = USB ehci0@pci0:0:18:2: class=0x0c0320 card=0x43961002 chip=0x43961002 rev=0x00 hdr=0x00 class = serial bus subclass = USB ohci1@pci0:0:19:0: class=0x0c0310 card=0x43971002 chip=0x43971002 rev=0x00 hdr=0x00 class = serial bus subclass = USB ehci1@pci0:0:19:2: class=0x0c0320 card=0x43961002 chip=0x43961002 rev=0x00 hdr=0x00 class = serial bus subclass = USB none0@pci0:0:20:0: class=0x0c0500 card=0x15101022 chip=0x43851002 rev=0x42 hdr=0x00 class = serial bus subclass = SMBus isab0@pci0:0:20:3: class=0x060100 card=0x439d1002 chip=0x439d1002 rev=0x40 hdr=0x00 class = bridge subclass = PCI-ISA pcib5@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x40 hdr=0x01 class = bridge subclass = PCI-PCI ohci2@pci0:0:20:5: class=0x0c0310 card=0x43991002 chip=0x43991002 rev=0x00 hdr=0x00 class = serial bus subclass = USB pcib6@pci0:0:21:0: class=0x060400 card=0x00001002 chip=0x43a01002 rev=0x00 hdr=0x01 class = bridge subclass = PCI-PCI ohci3@pci0:0:22:0: class=0x0c0310 card=0x43971002 chip=0x43971002 rev=0x00 hdr=0x00 class = serial bus subclass = USB ehci2@pci0:0:22:2: class=0x0c0320 card=0x43961002 chip=0x43961002 rev=0x00 hdr=0x00 class = serial bus subclass = USB hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x17001022 rev=0x43 hdr=0x00 class = bridge subclass = HOST-PCI hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x17011022 rev=0x00 hdr=0x00 class = bridge subclass = HOST-PCI hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x17021022 rev=0x00 hdr=0x00 class = bridge subclass = HOST-PCI hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x17031022 rev=0x00 hdr=0x00 class = bridge subclass = HOST-PCI hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x17041022 rev=0x00 hdr=0x00 class = bridge subclass = HOST-PCI hostb6@pci0:0:24:5: class=0x060000 card=0x00000000 chip=0x17181022 rev=0x00 hdr=0x00 class = bridge subclass = HOST-PCI hostb7@pci0:0:24:6: class=0x060000 card=0x00000000 chip=0x17161022 rev=0x00 hdr=0x00 class = bridge subclass = HOST-PCI hostb8@pci0:0:24:7: class=0x060000 card=0x00000000 chip=0x17191022 rev=0x00 hdr=0x00 class = bridge subclass = HOST-PCI re0@pci0:1:0:0: class=0x020000 card=0x012310ec chip=0x816810ec rev=0x06 hdr=0x00 class = network subclass = ethernet re1@pci0:2:0:0: class=0x020000 card=0x012310ec chip=0x816810ec rev=0x06 hdr=0x00 class = network subclass = ethernet re2@pci0:3:0:0: class=0x020000 card=0x012310ec chip=0x816810ec rev=0x06 hdr=0x00 class = network subclass = ethernet none1@pci0:4:0:0: class=0x020000 card=0x00000000 chip=0xff1c168c rev=0x01 hdr=0x00 class = network subclass = ethernet
Updated by Chris Buechler over 9 years ago
- Target version changed from 2.2.1 to 2.2.2
Updated by Chris Buechler over 9 years ago
- Subject changed from Upgrade from 2.2.0 to 2.2.1 forgets wireless card, trips the Interface Assignment. to ath card no longer detected in 2.2.1
- Category changed from Upgrade to Operating System
- Status changed from New to Confirmed
Updated by Chris Buechler over 9 years ago
which specific card is this? Looks like some AR5008.
Updated by Criggie . over 9 years ago
Chris Buechler wrote:
which specific card is this? Looks like some AR5008.
Looks like its this:
Compex WLE200NX: 802.11n/a/b/g miniPCIe Card
with Atheros AR9280 chipset
http://store.netgate.com/WLE200NX-80211nabg-miniPCIe-Card-P1763.aspx
Updated by Criggie . over 9 years ago
So I feel stupid - a power off and a reseat of the wireless card, and it boots up fine.
For completeness, here's the same commands:
[2.2.1-RELEASE][root@pfSense.criggie.org.nz]/root: dmesg | grep eth -i re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0xf7900000-0xf7900fff,0xf7800000-0xf7803fff i1 re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xf7b00000-0xf7b00fff,0xf7a00000-0xf7a03fff i2 re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf7d00000-0xf7d00fff,0xf7c00000-0xf7c03fff i3 [2.2.1-RELEASE][root@pfSense.criggie.org.nz]/root: dmesg | grep ath -i ath0: <Atheros 9280> at device 0.0 on pci4 [ath] enabling AN_TOP2_FIXUP ath0: [HT] enabling HT modes ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 stream STBC transmit enabled ath0: [HT] 2 RX streams; 2 TX streams ath0: AR9280 mac 128.2 RF5133 phy 13.0 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 ath0: only 1 sta vap supported [2.2.1-RELEASE][root@pfSense.criggie.org.nz]/root: ifconfig ath0 ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether 04:f0:21:10:c6:b7 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier [2.2.1-RELEASE][root@pfSense.criggie.org.nz]/root: pciconf -l | grep ath ath0@pci0:4:0:0: class=0x028000 card=0x3099168c chip=0x002a168c rev=0x01 hdr=0x00 [2.2.1-RELEASE][root@pfSense.criggie.org.nz]/root: pciconf -lv ... ath0@pci0:4:0:0: class=0x028000 card=0x3099168c chip=0x002a168c rev=0x01 hdr=0x00 class = network
Updated by Phillip Davis over 9 years ago
Hey, you made me nervous. I had just pressed the upgrade button on a way remote Alix 2D13 that has an ath0 WiFi card in it. I had actually forgotten about the unusual hardware in that remote system. It upgraded itself, rebooted, WiFi and OpenVPN links all came up fine. So at least my ath0 works, thankfully.
Updated by Chris Buechler over 9 years ago
- Status changed from Confirmed to Feedback
feedback from Adrian Chadd:
OK. It came up as devid 168c:ff1c. The ff1c means the nic didn't get its initial power on config from eeprom. Normally its because of some silly power up reset bug in how the bios sets up the PCI bus. The ar9380 and later show up as 168c:Abcd if it failed init or doesn't have any eeptom data.
This looks to be one of the APU BIOS bugs, maybe this APU hasn't had a BIOS update.
Updated by Criggie . over 9 years ago
Confirmed - this box was running
PC Engines APU BIOS build date: Apr 5 2014
and has been updated to
PC Engines APU BIOS build date: Sep 8 2014
I did this using the flashrom command in freeBSD
Firstly get the latest bios from http://www.pcengines.ch/apu1d.htm which was http://www.pcengines.ch/file/apu140908.zip for me.
Unzip it and scp the apu140908.rom to your pfsense box.
pkg install flashrom # it will want to go and update catalogues then install about 10 things rehash # because tcsh is quaint like that flashrom -p internal -c MX25L1605A/MX25L1606E -w apu140908.rom # Do the flash, usual warnings about don't unplug etc etc.
If you bork your APU bios flash, then order a LPC.1A from pcengines for about $10 US http://pcengines.ch/lpc1a.htm
That's a flash override so you can rescue your board.
Updated by Chris Buechler over 9 years ago
- Subject changed from ath card no longer detected in 2.2.1 to APU BIOS bug can make interfaces disappear after warm reboot
- Status changed from Feedback to Closed
- Target version deleted (
2.2.2)
it's a bug, but one in the older APU BIOS.