Project

General

Profile

Actions
Copy link

Bug #4611

closed

Limiter blocks port 80 traffic, passes other traffic

Added by David Gessel over 9 years ago. Updated over 9 years ago.

Status:
Duplicate
Priority:
Normal
Assignee:
-
Category:
Traffic Shaper (Limiters)
Target version:
-
Start date:
04/13/2015
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.2.1
Affected Architecture:
i386

Description

Details and screen shots are at https://forum.pfsense.org/index.php?topic=92214.0

Bug: Limiter blocks port 80 traffic for clients the limiter is applied to. 443 traffic seems fairly normal, email (587) works fine, ping is normal. No non-https sites will load. Disabling the rule that applies the limiter results in normal traffic (e.g. 80 works again). Moving the IP of the affected client into a non-limited group results in normal traffic. Re-enabling the limiter LAN rule or moving the client back into the limited IP block (as appropriate) results in non-HTTPS (port 80) sites being blocked.

Steps to recreate:
Create standard in/out limiters (set at 512k X 512k on a 2mbps x 2mpbs link in my case).
Apply limiter (by mac group alias in my case)
Limited client can't get to a port 80 site.

Actions
Copy link

Also available in: Atom PDF