pfSense » pfSense Packages

Note that after this, syslog-ng was still shown as installed, despite "Deleting files for syslog-ng-3.6.4" .....

Also note - same happened on trying to reinstall Squid...
However, despite the error, the package was successfully reported as reinstalled:

Installing pfSense-pkg-squid...

The following 14 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
pfSense-pkg-squid: 0.4.2 [pfSense]
squid_radius_auth: 1.10 [pfSense]
squid: 3.5.9_1 [pfSense]
krb5: 1.13.2_3 [pfSense]
cyrus-sasl: 2.1.26_12 [pfSense]
perl5: 5.20.3_8 [pfSense]
squidclamav: 6.10_2 [pfSense]
c-icap: 0.3.5_2,2 [pfSense]
c-icap-modules: 0.3.2_4 [pfSense]
clamav: 0.98.7 [pfSense]
unzoo: 4.4_2 [pfSense]
arc: 5.21p [pfSense]
lha: 1.14i_6 [pfSense]
arj: 3.10.22_4 [pfSense]

• Added group `cyrus' (id 60)
• Added user `cyrus' (id 60)
  [6/14] Extracting cyrus-sasl-2.1.26_12: .......... done
  [7/14] Installing perl5-5.20.3_8...
  [7/14] Extracting perl5-5.20.3_8: .......... done
  makewhatis: not found
  makewhatis: not found
  pkg: POST-INSTALL script failed
  [8/14] Installing c-icap-0.3.5_2,2...
  ===> Creating users and/or groups.
  Creating group 'c_icap' with gid '959'.
  Creating user 'c_icap' with uid '959'.
  [8/14] Extracting c-icap-0.3.5_2,2: .......... done
  [9/14] Installing clamav-0.98.7...
  ===> Creating users and/or groups.
  Using existing group 'clamav'.
  Using existing group 'mail'.
  Using existing user 'clamav'.
  [9/14] Extracting clamav-0.98.7: .......... done
  [10/14] Installing squid_radius_auth-1.10...
  [10/14] Extracting squid_radius_auth-1.10: .... done
  [11/14] Installing squid-3.5.9_1...
  ===> Creating users and/or groups.
  Creating group 'squid' with gid '100'.
  Creating user 'squid' with uid '100'.
  ===> Pre-installation configuration for squid-3.5.9_1
  [11/14] Extracting squid-3.5.9_1: .......... done
  [12/14] Installing squidclamav-6.10_2...
  [12/14] Extracting squidclamav-6.10_2: .......... done
  [13/14] Installing c-icap-modules-0.3.2_4...
  [13/14] Extracting c-icap-modules-0.3.2_4: .......... done
  [14/14] Installing pfSense-pkg-squid-0.4.2...
  [14/14] Extracting pfSense-pkg-squid-0.4.2: .......... done
  Message from cyrus-sasl-2.1.26_12:
  You can use sasldb2 for authentication, to add users use:

saslpasswd2 -c username

If you want to enable SMTP AUTH with the system Sendmail, read
Sendmail.README

NOTE: This port has been compiled with a default pwcheck_method of
auxprop. If you want to authenticate your user by /etc/passwd,
PAM or LDAP, install ports/security/cyrus-sasl2-saslauthd and
set sasl_pwcheck_method to saslauthd after installing the
Cyrus-IMAPd 2.X port. You should also check the
/usr/local/lib/sasl2/*.conf files for the correct
pwcheck_method.
If you want to use GSSAPI mechanism, install
ports/security/cyrus-sasl2-gssapi.
If you want to use LDAP auxprop plugin, install
ports/security/cyrus-sasl2-ldapdb.
Message from perl5-5.20.3_8:
The /usr/bin/perl symlink has been removed starting with Perl 5.20.
For shebangs, you should either use:

#!/usr/local/bin/perl

or

#!/usr/bin/env perl

The first one will only work if you have a /usr/local/bin/perl,
the second will work as long as perl is in PATH.
Message from squid-3.5.9_1:
o You can find the configuration files for this package in the
directory /usr/local/etc/squid.

o The default cache directory is /var/squid/cache/.
       The default log directory is /var/log/squid/.

Note:
       You must initialize new cache directories before you can start
       squid.  Do this by running "squid -z" as 'root' or 'squid'.
       If your cache directories are already initialized (e.g. after an
       upgrade of squid) you do not need to initialize them again.

0 When using DiskD storage scheme remember to read documentation:
         http://wiki.squid-cache.org/Features/DiskDaemon
       and alter your kern.ipc defaults in /boot/loader.conf. DiskD will not
       work reliably without this. Last recomendations were:

kern.ipc.msgmnb=8192
         kern.ipc.msgssz=64
         kern.ipc.msgtql=2048

o The default configuration will deny everyone but the local host and
       local networks as defined in RFC 1918 for IPv4 and RFCs 4193 and
       4291 for IPv6 access to the proxy service.  Edit the "http_access
       allow/deny" directives in /usr/local/etc/squid/squid.conf
       to suit your needs.

To enable Squid, set squid_enable=yes in either
     /etc/rc.conf, /etc/rc.conf.local or /etc/rc.conf.d/squid
     Please see /usr/local/etc/rc.d/squid for further details.

Note:
     If you just updated your Squid installation from an earlier version,
     make sure to check your Squid configuration against the 3.4 default
     configuration file /usr/local/etc/squid/squid.conf.sample.

/usr/local/etc/squid/squid.conf.documented is a fully annotated
     configuration file you can consult for further reference.

Additionally, you should check your configuration by calling
     'squid -f /path/to/squid.conf -k parse' before starting Squid.

Cleaning up cache... done.

Success