pfSense

This may be related to #643 in some way, upon further testing. I can only reproduce it if I change the VHID on the master, let it sync to the slave, and then edit/save the VIP on the slave, which results in this:

vip70: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500
    inet 192.168.7.1 netmask 0xffffff00 
    carp: MASTER vhid 70 advbase 1 advskew 100
vip72: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500
    inet 192.168.7.1 netmask 0xffffff00 
    carp: BACKUP vhid 72 advbase 1 advskew 100

Some more info on how to reproduce this. On a pair of systems already setup for config sync, do the following:

• Go to Firewall > Virtual IPs
• Create a new CARP VIP, give it a VHID, password, etc.
• Save/apply

• Go to Status > CARP (Failover)
• * There is a line for the new IP, but no interface listed
• Look at ifconfig -a
• * There is no VIP interface for this new CARP IP
• Go to Firewall > Virtual IPs
• Edit the new CARP IP
• Change nothing, just Save/Apply
• Look at Status > CARP and ifconfig -a
• * VIP interface is present with a proper name and working as expected.

• Go to Firewall > Virtual IPs
• Edit the CARP VIP created above, change its VHID.
• Save/apply

• Go to Firewall > Virtual IPs
• Edit the new CARP IP
• Change nothing, just Save/Apply
• Look at Status > CARP
• VIP interface is present with a proper name
• Look at ifconfig -a
• * There are multiple VIP interfaces as shown above, with different VHIDs but the same IP address assigned.

Is this still true?