pfSense

Is there anything in the system log for dpinger?

If I look at Status -> System logs -> gateways I only see the following message:

Time    Process    PID    Message
Jan 21 00:20:47    kernel        dpinger: 2.0 -> 2.0_1 [pfSense]

Greets

Philipp

The log entry doesn't make any sense to me. Please go to Status / Services and restart the dpinger daemon. Then post any messages in both Status / System Logs / System / General and Status / System Logs / System / Gateways. Thanks.

Sorry for my delay. I was not at home these days.

I tried restarting the service. If I try to restart the service I only get the message I posted earlier. No new logs, no messages, no errors, nothing.

There is one thing I'm thinking of. Do you have some special settings on the WAN-Interface for dpinger to work? Because I had to switch to a config file to provide option 60 for swisscom dhcp. So if there have to be any speacial settings in the WAN-configuration, this might be a starting point.

One more hint: I have IPv6 disabled because the setup does not work well with swisscoms 6rd setup.

ok, I found the issue with my system and it seems to work again.
As in my previous post described, the issue had to do with the custom wan configuration file. It started in pfsense 2.2 where the send option field was broken and the option dhcp-class-identifier "100008,0001,,pfSende dhclient 2.4" was split by the comma into multiple sends. So I configured the dhclient with a custom config file. But I did not think about it during the upgrade. Now I disabled this custom file and added the send option to the interface on the configpage and everything seems to work properly.

I consider this issue as solved and ready to close :-)

Sorry for taking your time and thanks for your support.

Keep up the good work!
I really love pfsense :-D