Bug #7378
closedpfctl: ix0: driver does not support altq
100%
Description
Motherboard: Supermicro X10SDV-4C-TLN2F
using the onboard NIC: 2 RJ45 10GBase-T ports
2.3.3-RELEASE-p1 (amd64)
FreeBSD 10.3-RELEASE-p17
I went through the wizard to setup traffic shaping and get the following error:
There were error(s) loading the rules: pfctl: ix0: driver does not support altq - The line in question reads [0]: @ 2017-03-11 10:16:04
It seems this is related to 10GBase ports. I don't need 10G at this time but don't have any other NICs so if a workaround is possible, that would be greatly helpful.
Updated by Luiz Souza over 7 years ago
- Status changed from New to Feedback
- Assignee set to Luiz Souza
- % Done changed from 0 to 100
Fix committed to RELENG_2_4, RELENG_2_3 and RELENG_2_3_3: https://github.com/pfsense/FreeBSD-src/commit/f2504b01d55b5cd3c625058869c4b9df1cf4525e
Updated by Jim Pingle almost 7 years ago
- Status changed from Feedback to Resolved
Updated by Jim Pingle over 6 years ago
- Category set to Traffic Shaper (ALTQ)
- Target version set to 2.4.2-p1
- Affected Version set to 2.4.x
- Affected Architecture All added
- Affected Architecture deleted (
)
Ultimately this was reverted at the time due to instability in the driver with ALTQ enabled.
See: https://forum.pfsense.org/index.php?topic=128064.msg706975#msg706975
It is not possible to support ALTQ on ix interfaces at this time.
Updated by Renato Botelho about 4 years ago
- Status changed from Resolved to Feedback
- Target version changed from 2.4.2-p1 to 2.5.0
I've re-enabled it on 2.5.0 snapshots so we can get it tested again
Updated by Luiz Souza about 4 years ago
- Status changed from Feedback to Resolved
Tested okay on SG-5100.