Bug #7778
closed
DHCP relay not working correctly with bridges
Added by Sander Peterse over 6 years ago.
Updated over 3 years ago.
Description
I have running a DHCP relay (IPv4) on 4 network interfaces, but it failed to work on 2 of them.
After looking into the source code (https://github.com/pfsense/pfsense/blob/782453b4dbb77e5bc97a43f56b95a006c5434d65/src/etc/inc/services.inc#L1696) is saw a few lines related to bridges. So I removed the 2 bridges and it also started working on these 2 interfaces. Removing the bridges on these interfaces is temporary fix (as I need it for 2 OpenVPN tap servers).
You can also see this issue on the command line (by calling 'ps uax | grep relay').
The output with the bridges (on interfaces lagg0_vlan2103 and lagg0_vlan2104):
/usr/local/sbin/dhcrelay -i lagg0_vlan2101 -i lagg0_vlan2102 -i lagg0_vlan900 192.168.1.33 192.168.1.34
The output without the bridges (temporary removed):
/usr/local/sbin/dhcrelay -i lagg0_vlan2101 -i lagg0_vlan2102 -i lagg0_vlan2103 -i lagg0_vlan2104 -i lagg0_vlan900 192.168.1.33 192.168.1.34
Some details about my config:
- lagg0_vlan2101 - Regular LAN 1
- lagg0_vlan2102 - Regular LAN 2
- lagg0_vlan2103 - Regular LAN 3 with bridge0 to a tap OpenVPN server.
- lagg0_vlan2104 - Regular LAN 4 with bridge1 to a tap OpenVPN server.
- lagg0_vlan900 - The network to which the DHCP requests are relayed to the DHCP servers 192.168.1.33 and 192.168.1.34.
I think this is a bug. Or is there a good reason not to run the DHCP relay server when the interface is member of a bridge?
- Status changed from New to Feedback
DHCP Relay has been prevented from running on bridges since it was first added to the GUI over 10 years ago. I don't see any notes in the code about why, but presumably the daemon didn't like attaching to bridges or had some other similar problem.
Two things to check:
1. Does that longer command run if you manually kill off dhcrelay and execute it with the bridges in place?
2. If you assign the bridge interface itself and put the IP address for the bridge there, and NOT on a bridge member interface, does it work?
Searching around a bit I don't see any concrete evidence that allowing it to run on bridges would be stable/desirable though.
If you have a manged switch, which you presumably do since you're using VLANs, you're better off setting the DHCP relay/IP helper server on it instead of the firewall.
I have done some testing as requested. The results:
1. Added bridge0 again between the VPN tap interface and lagg0_2104.
2. Killed the dhcrelay process.
3. Tried to execute:
- /usr/local/sbin/dhcrelay -i lagg0_vlan2101 -i lagg0_vlan2102 -i lagg0_vlan2103 -i lagg0_vlan2104 -i lagg0_vlan900 192.168.1.33 192.168.1.34
Starts fine (no errors).
4. Killed the dhcrelay process again.
5. Started the dhcrelay process again using the web-interface, the interface (lagg0_vlan2104) has been removed again from the proces arguments. Output of 'ps aux | grep relay':
/usr/local/sbin/dhcrelay -i lagg0_vlan2101 -i lagg0_vlan2102 -i lagg0_vlan2103 -i lagg0_vlan900 192.168.1.33 192.168.1.34
6. Killed the dhcrelay process again.
7. Started with the bridge interface instead of the lagg0_vlan2104.
- /usr/local/sbin/dhcrelay -i lagg0_vlan2101 -i lagg0_vlan2102 -i lagg0_vlan2103 -i bridge0 -i lagg0_vlan900 192.168.1.33 192.168.1.34
Starts fine (no errors).
It started OK, but did it actually function as intended?
When adding interface that's member of the bridge: yes
When adding the bridge (without it's interfaces): no
Any updates on this issue? Do you agree this is a bug or is there a good reason why the bridge interface isn't added to the DHCP relay?
Can you test this again on a 2.5.0 snapshot? There have been other DHCP Relay changes and it may be solved.
- Status changed from Feedback to Pull Request Review
- Target version set to 2.5.0
- Status changed from Pull Request Review to Feedback
- Assignee set to Renato Botelho
- % Done changed from 0 to 100
- Assignee changed from Renato Botelho to Sander Peterse
- Status changed from Feedback to Resolved
works as expected on 2.5.0.a.20201130.0650 -
bridges or bridge members can be upstream/downstream dhcp relay interfaces
Also available in: Atom
PDF
Updated by 
Updated by 
Updated by 
Updated by Anonymous 
Updated by Viktor Gurov