Bug #8051
closed
XG-2758 - Wrong Interface Assignment
Added by Clinton Cory about 7 years ago.
Updated almost 5 years ago.
Description
2.4.2-DEV CE (latest from an hour or so ago) installed on XG-2758 and the interfaces do not assign as expected.
https://www.netgate.com/docs/xg-2758/io-ports.html
WAN should be igb0 and LAN should be igb2 but the interfaces are assigned like this:
WAN -> igb0
LAN -> igb1
I have not been able to test this with the factory snapshot yet.
Confirmed the same issue is present with 2.4.2 factory.
This was not a problem with 2.4.1
- Affected Version changed from 2.4.2 to 2.4.4-p3
Verified this is still different on 2.4.4-p3 CE
- Target version set to 2.5.0
- Affected Version changed from 2.4.4-p3 to All
- Assignee set to Jim Pingle
- Status changed from New to Not a Bug
Several models were only detected in Factory and setup with the correct NICs. I copied a few more CE-compatible devices over so they could be recognized.
- Status changed from Not a Bug to Feedback
- % Done changed from 0 to 100
- Target version changed from 2.5.0 to 2.4.5
Here's what I get with a recent 2.4.5 memstick ADI CE install:
Netgate XG-2758 - Serial: Redacted - Netgate Device ID: Redacted
Those match the I/O port docs.
- Status changed from Feedback to Resolved
Also available in: Atom
PDF
Updated by 
Updated by 
Updated by