Bug #9258
closed
Error deleting tunnel type P2 when mixed with VTI
100%
Description
When trying to delete a (tunnel mode) phase 2 entry were both "tunnel" and "vti" modes are mixed the GUI is responding with an error:
The following input errors were detected:
Cannot delete a VTI Phase 2 while the interface is assigned. Remove the interface assignment before deleting this P2.
Please see attached screenshot
Workaround:
1. Remove the vti interface
2. remove all p2
3. recreate vti p2
4. readd vti interface
Files
Updated by Idar Lund over 5 years ago
Edit:
Workaround:
1. disable vti interface
2. remove all unwanted p2
3. enable vti interface
Updated by Mix Room over 4 years ago
Problem remains on 2.4.4-RELEASE-p3
Work-around works.
Updated by Jim Pingle over 4 years ago
- Assignee set to Jim Pingle
- Target version set to 2.5.0
Updated by Jim Pingle over 4 years ago
- Status changed from New to Feedback
- % Done changed from 0 to 100
Applied in changeset 37c6083084617e3fd079876352109ff38aa6613b.
Updated by Viktor Gurov over 4 years ago
Jim Pingle wrote:
Applied in changeset 37c6083084617e3fd079876352109ff38aa6613b.
Tested on 2.5.0.a.20191011.1853
P2 tunnel mode is now removed correctly
Resolved
Updated by Jim Pingle over 4 years ago
- Target version changed from 2.5.0 to 2.4.5
Updated by Jim Pingle over 4 years ago
- Status changed from Resolved to Feedback
Needs checked and/or tested again on 2.4.5 snapshots
Updated by Jim Pingle over 4 years ago
- Subject changed from error when deleting P2 to Error when deleting tunnel type P2 when mixed with VTI
Updated by Jim Pingle over 4 years ago
- Subject changed from Error when deleting tunnel type P2 when mixed with VTI to Error deleting tunnel type P2 when mixed with VTI
Updated by Jim Pingle over 4 years ago
- Status changed from Feedback to Resolved
Deleting a "tunnel" type P2 when a VTI P2 exists is now allowed as expected.
2.4.5.a.20191220.0501