pfSense

Switch over to array style page titles. Obtained-from: m0n0wall

Add descriptive text and link to the gateways page

Add prelimenary Routing page.
Allow multiple gateways on one (static) interface

Fixing css layout

Create a management subnet on a wan interface if the interface is DHCP.
Create automatic nat rules for the management subnet.
Make the automatic nat rules always use the interface address.
Allow entry of these subnets on the interfaces page.

Fix botched config path and variables

Make the rrd gateway monitor ip setting accessible

Reset dynamic dns upon pppoe forced disconnect.

Ticket #1325

• fix: if theres a chance to add an error ... Place LF at the correct position

• fix: added missing LF

PPPoE automatic disconnect MFC

Submitted-by: DSH
Really, really, really wanted by: Hoba

Commit #1 of #2

Unlink config.cache before reloading. It somehow spoils the FTP helper from being loaded.

Also check policy based routing and see if the gateway is in use.

Compare against $pconfig and only check items if gateway is changing.

Someone please purchase me a spell checker.

Fix input_errors typo

If a gateway is being used by the load balancer pool, do not allow operator to reassign the gateway ip to an interface. This creates a route loop and is bad.

Ticket #1039

• Add reset_carp()
• Utilizie reset_carp() after interface changes if need be

Setup CARP interfaces after interface changes. CARP nics will go into INIT if the gateway, etc is changed.

HEAD already does this via the reload_interfaces code.

Flush buffers before reloading interface specific items

Move reload pieces to end of page, call filter_configure() afterwards

Do not use reload_* until we can fix the console bug

Remove bandwidth items. We don't want to confuse the user with un-used items.

Remove bandwidth items. We don't want to confuse the user with un-used items.

Add RFC 1918 block indicator from m0n0wall 1.21

Remove #!/usr/local/bin/php

Use /tmp/reload_interfaces

Correctly check/uncheck FTP Helper

MFC 7415
Use $pconfig

MFC 7413
Make FTP Its own area with header bar

MFC 7401
Add support for per interface ftp helper.

Suggested-by: Dan Swartzendruber <dswartz_AT_druber.com>

In-Discussion-with: Bill M, Dan S

Spell unset() correctly

MFC 6969

Save and restore checkbox states correctly

Reported-by: nngabriel on irc

• Correctly bring up a new bridge
• Correctly destroy a bridge when no longer used

filter_translate_type_to_real_interface() on the bridge interface

Destroy the bridge either way, it will be recreated if needed.

Missing ;

Move wan gateway to interfaces->wan->gateway

If user is deleting a bridge, destroy it.

Adjust carp bootup sequence. Do not down the interfaces and later up them.

Minor cleanups. No functional changes.

Clarify WHICH speed the user should enter here. Its physical NIC speed.

Enforce bandwidth values

Ticket #347

Eliminate reboots and correct messages

Nuke reboot notice

Move "Type" selection down to "general configuration" table

Use $pgtitle
Fix assign/vlan tabs (backwards)

Use new header system.

Bring carp back up after wan changes

force wan configuration

make a copy of $optcfg since the wireless code depenes on $optcfg

• Do not set bandwidth and bandwidth type unless are other than ""
• Unset the values if either condition is not met in the config

Add "Copy my MAC address" feature which copies the mac address of the person surfing into pfSense. Useful when a user needs to override their wan with their machines mac address

normalize MAC addresses

Add $Id$ tag

variable cleanup

Move default gateway out of wan config to system config (leave in gui though)
Remove scheduler config from interfaces
Bump config file version to 1.5

Enable bogon filtering

Correctly restore interface bandwidth.

allow bandwidth to not be defined

Move scheduler type to advanced menu. We'll default to PRIQ as a simple starting point for new users. NOTE: The scheduler type goes into affect for all interfaces.

remove /31 from interface IP assignment screens since a /31 subnet has 0 usable IP addresses. simpify all 1-32 loops by using the same code as much as possible.

Correct white space seperation.

Update with 1.2b3

Merge in m0n0wall 1.2b3 changes.

Update to dropdowns to count to /32

Add scheduler type per interface and allow user to define overall bandwidth for the interface

Interface speed definitions for interfaces

Clean up save or reboot message, add bandwidth elements to WAN and LAN for traffic shaping. Clean up a few bugs in traffic shaping queue edit screen.

Initial revision