Project

General

Profile

Actions
Copy link

Feature #10804

closed

Interface Status page information for switch uplinks may be replaced by switch port data when media state monitoring is set

Added by Grischa Zengel over 3 years ago. Updated about 3 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
Viktor Gurov
Category:
Interfaces
Target version:
21.02.2
Start date:
07/31/2020
Due date:
% Done:

100%

Estimated time:
Release Notes:
Default

Description

Like in #10793#note-9 written status->interface for mvneta1 shows mixed data from mvneta1 and switch port 1.

Make it more transparent which data are shown.

You can show both connect speeds and traffic counters or you add the switch port to the section:
1_LAN Interface (lan, mvneta1) => 1_LAN Interface (lan, mvneta1, e6000sw0port1)

The best is, you show all: mvneta1 and e6000sw0port[1-5]

Files

Download all files
port1.png (27.3 KB) port1.png Alhusein Zawi, 04/03/2021 06:13 PM
port2.png (26.7 KB) port2.png Alhusein Zawi, 04/03/2021 06:13 PM
Actions
Copy link
 #1

Updated by Jim Pingle over 3 years ago

  • Subject changed from status->interface: the data shown for mvneta1 is not always the real data of mvneta1 to status_interfaces.php: Data for switch uplinks may be replaced by switch port data when media state monitoring is set
  • Category set to Interfaces

Fixing the subject and adding some notes:

This happens if "Switch Port" on Interfaces > LAN (or whichever interface the uplink is assigned) is set to one of the switch ports, rather than being left at the default setting. So in that case it is expected since the page is following what the user requested, though it may not be what they intended.

Seeing the uplink status would still be useful in this case, as well as indicating the port status monitoring association on the interface status output.

Actions
Copy link
 #2

Updated by Viktor Gurov over 3 years ago

Show switch tagging ports on status_interfaces page:
https://gitlab.netgate.com/pfSense/pfSense/-/merge_requests/76

Actions
Copy link
 #3

Updated by Renato Botelho over 3 years ago

  • Status changed from New to Pull Request Review
  • Assignee set to Viktor Gurov
  • Target version set to CE-Next
Actions
Copy link
 #4

Updated by Renato Botelho about 3 years ago

  • Status changed from Pull Request Review to Feedback

PR has been merged. Thanks!

Actions
Copy link
 #5

Updated by Viktor Gurov about 3 years ago

  • % Done changed from 0 to 100

Applied in changeset commit:4e5e99a61d422941e69b2caa11e948363409e48c.

Actions
Copy link
 #6

Updated by Jim Pingle about 3 years ago

  • Project changed from pfSense to pfSense Plus
  • Category changed from Interfaces to Interfaces
  • Status changed from Feedback to Waiting on Merge
  • Target version changed from CE-Next to 21.02.2
Actions
Copy link
 #7

Updated by Renato Botelho about 3 years ago

  • Status changed from Waiting on Merge to Feedback

Cherry-picked to RELENG_2_5_1

Actions
Copy link
 #8

Updated by Jim Pingle about 3 years ago

  • Subject changed from status_interfaces.php: Data for switch uplinks may be replaced by switch port data when media state monitoring is set to Interface Status page information for switch uplinks may be replaced by switch port data when media state monitoring is set

Updating subject for release notes.

Actions
Copy link
 #9

Updated by Alhusein Zawi about 3 years ago

Status>Interfaces shows tagged ports

Netgate XG-7100

21.02.2-RC (amd64)
built on Sat Apr 03 03:04:06 EDT 2021
FreeBSD 12.2-STABLE

Actions
Copy link
 #10

Updated by Viktor Gurov about 3 years ago

  • Status changed from Feedback to Resolved
Actions
Copy link

Also available in: Atom PDF