Regression #14269: 1100/2100: switch ports not enabled for auto-mdi-x - pfSense Plus - pfSense bugtracker

PP Updated by Peter Poulos over 3 years ago Actions
Copy link
#1

aleksei prokofiev wrote:

In 23.01 the 1100 switch ports do not support auto-MDI/X. The customer try to connect 1100 with 2100 and no success, to fix it needs cross-over cable or switch in the middle.
I tested the 1100 connected directly to the 3100 and it works fine without a crossover cable. Physical loop between interfaces on 1100 shows no carrier, looks like the affected device is 1100, I don't have 2100 to check on it.

Hi Alex, i have tested a loop back on the 2100, ports dont light up, 2100 is also AFFECTED. hope this helps :)

JP Updated by Jim Pingle over 3 years ago Actions
Copy link
#2

Tracker changed from Bug to Regression
Subject changed from 1100: switch ports not enabled for auto-mdi-x to 1100/2100: switch ports not enabled for auto-mdi-x
Assignee set to Luiz Souza
Priority changed from Normal to High
Target version set to 23.05

JP Updated by Jim Pingle over 3 years ago Actions
Copy link
#3

Related to Regression #13993: Switch ports on 7100/1100/2100 do not have Auto MDI-X support enabled added

SW Updated by Steve Wheeler over 3 years ago Actions
Copy link
#4

Status changed from New to Feedback
Affected Architecture SG-2100 added

The same fix that applied to the 7100 is already in 23.05 snapshots. The switch ports link MDI and MDIX there as expected.

Tested:

23.05-DEVELOPMENT (arm64)
built on Mon Apr 10 06:05:58 UTC 2023
FreeBSD 14.0-CURRENT

JP Updated by Jim Pingle over 3 years ago Actions
Copy link
#5

Status changed from Feedback to Duplicate

Fix appears to be in and working for me as well. I get a link between the LAN and OPT ports on an 1100 running a 23.05 snapshot.

Given that the same fix applies to all of these, this should probably be marked a duplicate instead of a distinct issue.

Project

General

Profile

pfSense » pfSense Plus

Custom queries