pfSense

In 2.1-RC1 (amd64) built on Thu Aug 1 19:39:40 EDT 2013 driver version still 2.5.0.-8

There hasn't been a new snapshot yet since the patches were put in. Should be one up later today.

• Disable hardware TCP segmentation offload
• Disable hardware large receive offload
  In ifconfig i see following:

ix0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO>
        ether 68:05:ca:0c:87:1e
        inet6 fe80::6a05:caff:fe0c:871e%ix0 prefixlen 64 scopeid 0x1
        nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
        media: Ethernet autoselect
        status: no carrier
ix1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO>
        ether 68:05:ca:0c:87:1e
        inet6 fe80::6a05:caff:fe0c:871f%ix1 prefixlen 64 scopeid 0x2
        nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
        media: Ethernet autoselect
        status: no carrier
bce0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
        ether d8:d3:85:b9:f4:14
        media: Ethernet autoselect
bce1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=c00bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO,LINKSTATE>
        ether d8:d3:85:b9:f4:16
        inet 192.168.100.1 netmask 0xffffff00 broadcast 192.168.100.255
        inet6 fe80::dad3:85ff:feb9:f416%bce1 prefixlen 64 scopeid 0x4
        nd6 options=1<PERFORMNUD>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
ix2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO>
        ether a0:36:9f:1d:d5:00
        inet6 fe80::a236:9fff:fe1d:d500%ix2 prefixlen 64 scopeid 0x5
        nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
        media: Ethernet autoselect (10Gbase-Twinax <full-duplex>)
        status: active
ix3: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO>
        ether a0:36:9f:1d:d5:00
        inet6 fe80::a236:9fff:fe1d:d502%ix3 prefixlen 64 scopeid 0x6
        nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
        media: Ethernet autoselect (10Gbase-Twinax <full-duplex>)
        status: active
enc0: flags=0<> metric 0 mtu 1536
pflog0: flags=100<PROMISC> metric 0 mtu 33144
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=3<RXCSUM,TXCSUM>
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9
        nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
pfsync0: flags=0<> metric 0 mtu 1460
        syncpeer: 224.0.0.240 maxupd: 128 syncok: 1
lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO>
        ether 68:05:ca:0c:87:1e
        inet6 fe80::6a05:caff:fe0c:871e%lagg0 prefixlen 64 scopeid 0xb
        nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
        media: Ethernet autoselect
        status: no carrier
        laggproto lacp
        laggport: ix1 flags=0<>
        laggport: ix0 flags=0<>
lagg1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO>
        ether a0:36:9f:1d:d5:00
        inet6 fe80::a236:9fff:fe1d:d500%lagg1 prefixlen 64 scopeid 0xc
        inet 10.165.128.211 netmask 0xffffff00 broadcast 10.165.128.255
        nd6 options=1<PERFORMNUD>
        media: Ethernet autoselect
        status: active
        laggproto lacp
        laggport: ix3 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
        laggport: ix2 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>

looks like LRO and TSO always enabled :(

Zeev Zalessky wrote:

driver is updated in "2.1-RC1 (amd64) built on Tue Aug 6 16:41:24 EDT 2013" i checked in system->Advanced->Networking following check boxes:

• Disable hardware TCP segmentation offload
• Disable hardware large receive offload
  In ifconfig i see following:

[...]

looks like LRO and TSO always enabled :(

Was it being disabled before you update?

it's was disabled but didn't worked also. i hoped that new version fix the problem :(

Zeev Zalessky wrote:

it's was disabled but didn't worked also. i hoped that new version fix the problem :(

It's not related with driver update, please check ticket #1047