Project

General

Profile

Actions

Bug #6200

closed

LACP with em driver does not work with cisco active lacp setup

Added by Enzo Matrix about 8 years ago. Updated over 6 years ago.

Status:
Not a Bug
Priority:
Normal
Assignee:
-
Category:
Operating System
Target version:
-
Start date:
04/18/2016
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
All
Affected Architecture:

Description

LACP on the cisco switch does not get activated by LACP lagg on pfSense.
Using lagg with vlan on em nics. Hardware checksum offload is disabled in System->Advance->Networking

em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=42088<VLAN_MTU,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWTSO>
ether 00:15:17:35:94:62
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=40088<VLAN_MTU,VLAN_HWCSUM,VLAN_HWTSO>
ether 00:15:17:35:94:62
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:50:8b:11:4c:3e
inet6 fe80::250:8bff:fe11:4c3e%bge0 prefixlen 64 scopeid 0x3
inet netmask 0xffffff80 broadcast
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
pflog0: flags=100<PROMISC> metric 0 mtu 33160
pfsync0: flags=0<> metric 0 mtu 1500
syncpeer: 224.0.0.240 maxupd: 128 defer: on
syncok: 1
enc0: flags=0<> metric 0 mtu 1536
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=40088<VLAN_MTU,VLAN_HWCSUM,VLAN_HWTSO>
ether 00:15:17:35:94:62
inet 10.168.84.1 netmask 0xffffff00 broadcast 10.168.84.255
inet6 fe80::1:1%lagg0 prefixlen 64 scopeid 0x8
inet6 prefixlen 64
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: active
laggproto lacp lagghash l2,l3,l4
laggport: em0 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
laggport: em1 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
lagg0_vlan5: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:15:17:35:94:62
inet6 fe80::215:17ff:fe35:9462%lagg0_vlan5 prefixlen 64 scopeid 0x9
inet 10.168.85.1 netmask 0xffffff00 broadcast 10.168.85.255
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: active
vlan: 5 vlanpcp: 0 parent interface: lagg0
lagg0_vlan3: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:15:17:35:94:62
inet6 fe80::215:17ff:fe35:9462%lagg0_vlan3 prefixlen 64 scopeid 0xa
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: active
vlan: 3 vlanpcp: 0 parent interface: lagg0
lagg0_vlan6: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:15:17:35:94:62
inet6 fe80::215:17ff:fe35:9462%lagg0_vlan6 prefixlen 64 scopeid 0xb
inet 10.168.86.1 netmask 0xffffff00 broadcast 10.168.86.255
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: active
vlan: 6 vlanpcp: 0 parent interface: lagg0
lagg0_vlan10: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:15:17:35:94:62
inet6 fe80::215:17ff:fe35:9462%lagg0_vlan10 prefixlen 64 scopeid 0xc
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: active
vlan: 10 vlanpcp: 0 parent interface: lagg0
lagg0_vlan50: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:15:17:35:94:62
inet6 fe80::215:17ff:fe35:9462%lagg0_vlan50 prefixlen 64 scopeid 0xd
inet 10.168.130.1 netmask 0xffffff00 broadcast 10.168.130.255
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: active
vlan: 50 vlanpcp: 0 parent interface: lagg0
ovpns1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1500
options=80000<LINKSTATE>
inet6 fe80::250:8bff:fe11:4c3e%ovpns1 prefixlen 64 scopeid 0xf
inet 10.168.88.1 --> 10.168.88.2 netmask 0xffffffff
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
Opened by PID 20185
wan_stf: flags=4041<UP,RUNNING,LINK2> metric 0 mtu 1280
inet6 prefixlen 32
nd6 options=1<PERFORMNUD>
v4net

cisco lacp status:
LACP port Admin Oper Port Port
Port Flags State Priority Key Key Number State
Gi0/23 SA indep 32768 0x1 0x1 0x118 0x7D
Gi0/24 SA indep 32768 0x1 0x1 0x119 0x7D


Files

system.log (500 KB) system.log Enzo Matrix, 04/19/2016 07:58 AM
Actions

Also available in: Atom PDF