Project

General

Profile

Actions
Copy link

Bug #6818

closed

WAN traffic graph displays inverted bandwidth columns

Added by Daniele Sorrenti about 8 years ago. Updated almost 4 years ago.

Status:
Not a Bug
Priority:
Normal
Assignee:
Jared Dillard
Category:
Status_Monitoring
Target version:
-
Start date:
09/27/2016
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Affected Version:
2.3.2
Affected Plus Version:
Affected Architecture:
amd64

Description

Open Traffic Graph and select WAN interface.
On the graph, BW IN and OUT values are correct. In the Bandwidth In / Bandwidth Out columns, values are displayed inverted (in is out, out is in).
On other interfaces, all is right.

Files

WAN_TrafficGraph.PNG (52 KB) WAN_TrafficGraph.PNG Daniele Sorrenti, 09/27/2016 03:58 AM
Actions
Copy link
 #1

Updated by Jim Pingle about 8 years ago

  • Status changed from New to Feedback

Check again on a 2.3.3 or 2.4 snapshot those graphs have been replaced.

Actions
Copy link
 #2

Updated by Phillip Davis about 8 years ago

And that image is correct for the current traffic graph system (2.3.2). For example, the 3rd host down in the table is sending OUT 2.69Mbit/sec across the internet to the WAN which is receiving IN from it and all those hosts totaling 3.83Mbit/sec arriving IN on WAN.
The IN/OUT is with respect to the box/IP address concerned.

Actions
Copy link
 #3

Updated by Daniele Sorrenti about 8 years ago

Jim Pingle wrote:

Check again on a 2.3.3 or 2.4 snapshot those graphs have been replaced.

Thank you. It is a critical production system, I can't check a pre-release now. I'm sorry :-(

Actions
Copy link
 #4

Updated by Daniele Sorrenti about 8 years ago

Phillip Davis wrote:

And that image is correct for the current traffic graph system (2.3.2). For example, the 3rd host down in the table is sending OUT 2.69Mbit/sec across the internet to the WAN which is receiving IN from it and all those hosts totaling 3.83Mbit/sec arriving IN on WAN.
The IN/OUT is with respect to the box/IP address concerned.

In this case, all other interface graphs have columns inverted...

Actions
Copy link
 #5

Updated by Jim Thompson about 8 years ago

  • Assignee set to Jared Dillard
Actions
Copy link
 #6

Updated by Jim Pingle about 7 years ago

  • Status changed from Feedback to Not a Bug
Actions
Copy link
 #7

Updated by Jim Pingle over 5 years ago

  • Project changed from pfSense to pfSense Packages
  • Category changed from 118 to Status_Monitoring
Actions
Copy link
 #8

Updated by Fernando Rapetti almost 4 years ago

I was checking traffic today, in a situation of heavy file upload to the internet, and i'm seeing that everything is OK with the Traffic Graph for the WAN adapter (OUT is high in the graph and in the table). However, if i look at the LAN adapter, the graphic is OK (IN is high), but the table is incorrect (OUT is high). This looks like the in/out traffic is listed in the wrong column for the LAN adapter.
pfSense version is 2.4.5-RELEASE-p1 (amd64).

Regards

Actions
Copy link

Also available in: Atom PDF