Project

General

Profile

Actions

Bug #6823

open

No connectivity after changing link state to UP

Added by C S about 8 years ago. Updated over 2 years ago.

Status:
New
Priority:
Normal
Assignee:
-
Category:
Interfaces
Target version:
-
Start date:
09/28/2016
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.3.2
Affected Architecture:
i386

Description

Hi guys,

I have pfSense 2.3.2 installed on a Soekris net6501-50 board. I recently noticed that when the link of the two bridged LAN interfaces comes back up again,after being down for a few hours, the device connected doesn't have network connectivity. Basically I have to reboot pfSense to make it work. I have tried plugging in other devices, cables, restarting services etc. but nothing helped.

You can see below the system log showing em0/LAN1 interface coming back up and honestly I don't know why newwanip and OpenVPN are mentioned since this has nothing to do with the WAN interface, my WAN is em3 actually. TFTP proxy is also not enabled at all.

I was thinking my issue might be a bug related to a driver and the way it initializes an interface, but I'm not really sure and that's why I'm posting it here. By the way, if I want to reinstall the latest pfSense on that board, I have to install 2.1.5 from memstick to my CF and then use the web UI to upgrade directly to 2.3.x and restore my config. If I install directly 2.3.x it doesn't boot from the CF for whatever reason and this is something other people have also noticed with Soekris boards.

Any feedback would be really appreciated, thank you in advance!

Sep 27 08:02:42 kernel em2: promiscuous mode enabled
Sep 27 08:02:42 kernel ath0_wlan0: promiscuous mode enabled
Sep 27 08:02:42 kernel bridge0: promiscuous mode enabled
Sep 27 08:02:40 xinetd 24203 Reconfigured: new=0 old=1 dropped=0 (services)
Sep 27 08:02:40 xinetd 24203 readjusting service 6969-udp
Sep 27 08:02:40 xinetd 24203 Swapping defaults
Sep 27 08:02:40 xinetd 24203 Starting reconfiguration
Sep 27 08:02:40 kernel em2: promiscuous mode disabled
Sep 27 08:02:40 kernel ath0_wlan0: promiscuous mode disabled
Sep 27 08:02:40 kernel bridge0: promiscuous mode disabled
Sep 27 08:02:39 check_reload_status Reloading filter
Sep 27 08:02:36 php-fpm 76611 /rc.start_packages: Restarting/Starting all packages.
Sep 27 08:02:35 check_reload_status Starting packages
Sep 27 08:02:35 php-fpm 76368 /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 0.0.0.0 -> - Restarting packages.
Sep 27 08:02:33 php-fpm 76368 /rc.newwanip: Creating rrd update script
Sep 27 08:02:33 php-fpm 76368 /rc.newwanip: Resyncing OpenVPN instances for interface LAN1.
Sep 27 08:02:31 xinetd 24203 Reconfigured: new=0 old=1 dropped=0 (services)
Sep 27 08:02:31 xinetd 24203 readjusting service 6969-udp
Sep 27 08:02:31 xinetd 24203 Swapping defaults
Sep 27 08:02:31 xinetd 24203 Starting reconfiguration
Sep 27 08:02:29 xinetd 24203 Reconfigured: new=0 old=1 dropped=0 (services)
Sep 27 08:02:29 xinetd 24203 readjusting service 6969-udp
Sep 27 08:02:29 xinetd 24203 Swapping defaults
Sep 27 08:02:29 xinetd 24203 Starting reconfiguration
Sep 27 08:02:29 php-fpm 76368 /rc.newwanip: IP has changed, killing states on former IP 0.0.0.0.
Sep 27 08:02:28 php-fpm 76368 /rc.newwanip: rc.newwanip: on (IP address: ) (interface: LAN1[opt4]) (real interface: em0).
Sep 27 08:02:28 php-fpm 76368 /rc.newwanip: rc.newwanip: Info: starting on em0.
Sep 27 08:02:27 check_reload_status Reloading filter
Sep 27 08:02:27 check_reload_status rc.newwanip starting em0
Sep 27 08:02:27 php-fpm 76368 /rc.linkup: Hotplug event detected for LAN1 static IP ( )
Sep 27 08:02:26 kernel em0: link state changed to UP
Sep 27 08:02:26 check_reload_status Linkup starting em0

Actions

Also available in: Atom PDF