Project

General

Profile

Actions
Copy link

Bug #7786

closed
BC

traffic shaping queue on WAN wont allow total of all child to be 100%

Bug #7786: traffic shaping queue on WAN wont allow total of all child to be 100%

Added by Bipin Chandra about 9 years ago. Updated almost 9 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
-
Category:
Traffic Shaper (ALTQ)
Target version:
2.4.2
Start date:
08/19/2017
Due date:
% Done:

100%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.4.x
Affected Architecture:

Description

i was setting up traffic shaping on a sg-1000, i found 2 issues:

firstly on wan i added a qinternet and set it to 70mbps and then created 5 child queues under that and it totals to 100% but it wont allow that, max i can goto is 99%. The same i do on the lan interface then it allows total to be 100%.

secondly if u create a qinternet under wan a a child queue called qack under that and then u try to clone that to lan then the tree is lost and qinternet and qack both end up under tha lan interface

JT Updated by Jim Thompson about 9 years ago Actions
Copy link
 #1

  • Priority changed from High to Normal

RB Updated by Renato Botelho about 9 years ago Actions
Copy link
 #2

  • Target version changed from 2.4.0 to 2.4.1

JP Updated by Jim Pingle almost 9 years ago Actions
Copy link
 #3

  • Target version changed from 2.4.1 to 2.4.2

Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.

BC Updated by Bipin Chandra almost 9 years ago Actions
Copy link
 #4

i think this requires some php code changes only as the web gui doesnt allow, the shaper itself is fine with it when edited manually

JT Updated by Jim Thompson almost 9 years ago Actions
Copy link
 #5

  • Assignee set to Anonymous

Updated by Anonymous almost 9 years ago Actions
Copy link
 #6

  • Status changed from New to Feedback
  • % Done changed from 0 to 100

Applied in changeset commit:fbbd7d2b53492b9d7ce7fb02218de2cdda31ce27.

Updated by Anonymous almost 9 years ago Actions
Copy link
 #7

On pfSense-netgate-uFW-recover-2.4.2-DEVELOPMENT-armv6-20171104-1805 unable to reproduce. Created parent queue for 50Mb/s, then a child at 100% with no issue, same with 50% and 50% child queues.

Can be set to resolved.

JP Updated by Jim Pingle almost 9 years ago Actions
Copy link
 #8

  • Status changed from Feedback to Resolved

Looks good here, too.

Actions
Copy link

Also available in: Atom