Project

General

Profile

Bug #8945

SquidGuard ACL blacklists

Added by lahoucine El kamel almost 2 years ago. Updated over 1 year ago.

Status:
Resolved
Priority:
Very High
Assignee:
Category:
squidguard
Target version:
Start date:
09/25/2018
Due date:
% Done:

0%

Estimated time:
Affected Version:
2.4.x
Affected Architecture:

Description

Hello,

When editing the Squid Guard Proxy Filter I noticed that the settings after saving are not loaded.
Example: Target Rules List: "WhiteList !BlackList all"
when loading the list:
Common ACL - Target Rules List - does not load, it shows the WhileList as "----" and it should be preselected as "allow"

servicewatchdog_cron.php: Service Watchdog detected service c-icap stopped. Restarting c-icap (ICAP Inteface for Squid and ClamAV integration)

Thank you

Packages:
squid: 0.4.44_2
squidGuard: 1.16.17_3

History

#1 Updated by Jim Pingle almost 2 years ago

The i-cap issue is covered under #8832

#2 Updated by lahoucine El kamel almost 2 years ago

Hello,

I have updated Squid and the ACL issue is still there.
When editing the Squid Guard Proxy Filter I noticed that the settings after saving are not loaded.

Common ACL /Group ACL - Target Rules List - does not load, it shows the WhileList as "----" and it should be preselected as "allow" Or "deny"

Any idea?

#3 Updated by Charles Melo almost 2 years ago

lahoucine El kamel wrote:

Hello,

When editing the Squid Guard Proxy Filter I noticed that the settings after saving are not loaded.
Example: Target Rules List: "WhiteList !BlackList all"
when loading the list:
Common ACL - Target Rules List - does not load, it shows the WhileList as "----" and it should be preselected as "allow"

servicewatchdog_cron.php: Service Watchdog detected service c-icap stopped. Restarting c-icap (ICAP Inteface for Squid and ClamAV integration)

Thank you

Packages:
squid: 0.4.44_2
squidGuard: 1.16.17_3

I have the same problem, the outline solution that I applied was to include the direct acls in the configuration file (/usr/local/etc/squidGuard/squidGuard.conf), this way squdguard worked correctly. It looks like the update does not update configuration file and neither does the frontend display the options.

#4 Updated by Helio Candido almost 2 years ago

lahoucine El kamel wrote:

Hello,

When editing the Squid Guard Proxy Filter I noticed that the settings after saving are not loaded.
Example: Target Rules List: "WhiteList !BlackList all"
when loading the list:
Common ACL - Target Rules List - does not load, it shows the WhileList as "----" and it should be preselected as "allow"

servicewatchdog_cron.php: Service Watchdog detected service c-icap stopped. Restarting c-icap (ICAP Inteface for Squid and ClamAV integration)

Thank you

Packages:
squid: 0.4.44_2
squidGuard: 1.16.17_3

The same issue here. We have 3 pfsense servers and squid/squidguard stopped to work correctly in all of them. There are lots of PHP error/reports when we trying to reconfigure them. We just rollback because that new update make impossible to work with the servers.

#5 Updated by lahoucine El kamel almost 2 years ago

I had to rollback too...

#6 Updated by Marcel Beerli almost 2 years ago

Any indication when this is getting fixed?
Its in PackageProxy filter SquidGuard: Common Access Control List (ACL)Common ACL and
Proxy filter SquidGuard: Groups Access Control List (ACL)EditGroups ACL

also with squid: 0.4.44_5

So basically unusable right now, no protection, correct?

#7 Updated by Issa Jacaman almost 2 years ago

I was on release 2.4.3-RELEASE-p1 (amd64) and did package updates to
squidGuard -> 1.16.17_3
squid -> 0.4.44_5
I was thinking I would not have this Bug #8945, but I have it now and I am still with 2.4.3-Release-p1.

#8 Updated by Marcel Beerli almost 2 years ago

Then it looks like its in either of the 2 packages. (squid or squidGuard), probably squidGuard

#9 Updated by Issa Jacaman almost 2 years ago

Marcel Beerli wrote:

Then it looks like its in pfSense 2.4.4 not in the packages.
Lets hope it gets addressed in 2.4.4.1

Please not I did not update pfsense to the latest release (2.4.4) but I only updated the packages and I got the same issue.

#10 Updated by Jim Pingle over 1 year ago

  • Assignee deleted (Azamat Khakimyanov)

#11 Updated by Jim Pingle over 1 year ago

  • Status changed from New to In Progress
  • Assignee set to Jim Pingle

#12 Updated by Jim Pingle over 1 year ago

  • Status changed from In Progress to Feedback

Fixed in squidGuard pkg v 1.16.18 which will show up shortly.

#13 Updated by Issa Jacaman over 1 year ago

Great Thanks a lot. It works fine in my pfsense

#14 Updated by Marcel Beerli over 1 year ago

Works again. Thank you

#15 Updated by Jim Pingle over 1 year ago

  • Status changed from Feedback to Resolved

#16 Updated by Steve Beaver over 1 year ago

  • Target version changed from 2.4.4-GS to 2.4.4-p1

#17 Updated by Steve Beaver over 1 year ago

  • Target version changed from 2.4.4-p1 to 2.4.4-GS

#18 Updated by Andres Noriega over 1 year ago

I had to make a clean install, but it is working for me as well ! Thanks a lot for your support guys

Also available in: Atom PDF