pfSense » pfSense Packages

09/27/2018

10:20 PM Bug #8832: c-icap for Squid 5.1 on 2.4.4 Developer not starting

upgraded to squid 0.4.44_5 but c-icap is still not starting. Marcel Beerli

07:32 PM Bug #8966: Patches page uses GET instead of POST when performing actions

Yeah that was due to a syntax error I made in the previous commit. Fix has been pushed, update and try again Jim Pingle

06:42 PM Bug #8966: Patches page uses GET instead of POST when performing actions

I'm not entirely sure this related, but I just upgraded a system to 2.4.4 which picked up the new System Patches v1.2... Anonymous

01:36 PM Bug #8966 (Feedback): Patches page uses GET instead of POST when performing actions

Fixed in System Patches v1.2, which will show up shortly. Jim Pingle

11:53 AM Bug #8966 (Resolved): Patches page uses GET instead of POST when performing actions

When the patches page system_patches.php is used to apply or revert a patch, the link in the cookie trail area of tha... Mitch Claborn

02:21 PM Bug #8968 (Duplicate): Proxy filter SquidGuard - not loading properly

ACL issue is a duplicate of #8945
icap issue is a duplicate of #8832 Jim Pingle

02:19 PM Bug #8968 (Duplicate): Proxy filter SquidGuard - not loading properly

Hi,
running with pfsense 2.4.4 with squid 0.4.44_4 and squidguard 1.16.17_3
when Squid Guard Proxy Filter - Group A... Marcel Beerli

12:55 PM Bug #8945: SquidGuard ACL blacklists

I had to rollback too... lahoucine El kamel

09/26/2018

06:37 AM Bug #8945: SquidGuard ACL blacklists

lahoucine El kamel wrote:
> Hello,
>
> When editing the Squid Guard Proxy Filter I noticed that the settings afte... Helio Candido

06:00 AM Bug #8945: SquidGuard ACL blacklists

lahoucine El kamel wrote:
> Hello,
>
> When editing the Squid Guard Proxy Filter I noticed that the settings afte... Charles Melo

01:43 AM Bug #8945: SquidGuard ACL blacklists

Hello,
I have updated Squid and the ACL issue is still there.
When editing the Squid Guard Proxy Filter I noticed... lahoucine El kamel

09/25/2018

01:52 PM Bug #8832 (Feedback): c-icap for Squid 5.1 on 2.4.4 Developer not starting

This should be fixed now. Update the squid package and it should pick up the c-icap update and then work as expected.... Jim Pingle

11:47 AM Bug #8832: c-icap for Squid 5.1 on 2.4.4 Developer not starting

Attached is a patch to fix the c-icap FreeBSD port default config to use the correct current syntax. Jim Pingle

10:39 AM Bug #8832: c-icap for Squid 5.1 on 2.4.4 Developer not starting

The upstream port is _not_ fine. See the file I linked. The FreeBSD port is explicitly adding the ListenAddress direc... Jim Pingle

10:33 AM Bug #8832: c-icap for Squid 5.1 on 2.4.4 Developer not starting

Hi Jim,
the guy from the mailing list is me.
The "Listen" directive was removed from 0.4 to 0.5.
Upstream port... Michael M

08:12 AM Bug #8944 (Duplicate): attemp of installing pfblocker brakes system on 2.4.3

Duplicate of #8938 Jim Pingle

04:47 AM Bug #8944 (Duplicate): attemp of installing pfblocker brakes system on 2.4.3

Any attempt to install pfblocker on clean 2.4.3-p1 breaks system.
Errors during installation:... Constantine Kormashev

07:39 AM Bug #8945: SquidGuard ACL blacklists

The i-cap issue is covered under #8832 Jim Pingle

07:33 AM Bug #8945 (Resolved): SquidGuard ACL blacklists

Hello,
When editing the Squid Guard Proxy Filter I noticed that the settings after saving are not loaded.
Example... lahoucine El kamel

09/24/2018

10:54 PM Bug #8940 (Duplicate): ICAP Inteface for Squid and ClamAV integration - service not starting

Duplicate of #8832 Jim Pingle

10:18 PM Bug #8940 (Duplicate): ICAP Inteface for Squid and ClamAV integration - service not starting

After the upgrade I had a crash report but it seemed to run. But on a new restart of the pcengines APU2 it would not ... Marcel Beerli

08:05 PM Bug #8832: c-icap for Squid 5.1 on 2.4.4 Developer not starting

If the FreeBSD port is wrong, though, it should be fixed upstream. Then we wouldn't need to make any changes.
Some... Jim Pingle

07:17 PM Bug #8832: c-icap for Squid 5.1 on 2.4.4 Developer not starting

Suggested fix: https://github.com/stephenw10/FreeBSD-ports/commit/d21954ad3b4e44e4df6e43e88ac22d589d8cf1b7 Steve Wheeler

07:09 PM Bug #8832: c-icap for Squid 5.1 on 2.4.4 Developer not starting

This is a problem in the FreeBSD c-icap port. The port itself contains a patch that adds the ListenAddress line.
h... Jim Pingle

04:33 PM Bug #8832: c-icap for Squid 5.1 on 2.4.4 Developer not starting

Confirmed the above fix is still functional in 2.4.4r but the default package is still broken.
As a workaround you... Steve Wheeler

03:45 PM Bug #8932: Upgrade to HaProxy 0.59_11 fails on 2.4.3

Ah, I forgot that it automatically probes the "latest stable" repo which automatically points you to 2.4.4/RELENG_2_4... Jim Pingle

03:44 PM Bug #8932: Upgrade to HaProxy 0.59_11 fails on 2.4.3

I can confirm that upgrading to 2.4.4 fixes it, as well as downgrading haproxy to 0.59_9 via: pkg add -f https://file... Florian Apolloner

03:41 PM Bug #8932: Upgrade to HaProxy 0.59_11 fails on 2.4.3

I agree "it shouldnt be". But i'm seeing my 2.4.3 box offer to install haproxy 0.59_11 .. which at least isn't availa... Pi Ba

03:33 PM Bug #8932: Upgrade to HaProxy 0.59_11 fails on 2.4.3

It shouldn't be, they are on different branches (RELENG_2_4_3 vs RELENG_2_4_4), the commit may have been manually che... Jim Pingle

03:17 PM Bug #8932: Upgrade to HaProxy 0.59_11 fails on 2.4.3

It seems like 2.4.3 is automatically pulling in the 2.4.4 repository files..?? Even though the 2.4.3 files still exis... Pi Ba

02:09 PM Bug #8932: Upgrade to HaProxy 0.59_11 fails on 2.4.3

Well it sounds as if https://github.com/pfsense/FreeBSD-ports/pull/555#discussion_r212271252 got into 2.4.3? Florian Apolloner

02:04 PM Bug #8932: Upgrade to HaProxy 0.59_11 fails on 2.4.3

No, each release has its own branch. It's possible that an edit intended to only stay on 2.4.4 was picked back to 2.4... Jim Pingle

02:03 PM Bug #8932: Upgrade to HaProxy 0.59_11 fails on 2.4.3

Are you saying that packages are served from one repo only and will more or less immediately break if a new release o... Florian Apolloner

01:58 PM Bug #8932: Upgrade to HaProxy 0.59_11 fails on 2.4.3

Upgrade to 2.4.4 and try again. Jim Pingle

01:52 PM Bug #8932 (Resolved): Upgrade to HaProxy 0.59_11 fails on 2.4.3

I cannot upgrade to haproxy 0.59_11 because getarraybyref() no longer exists:... Florian Apolloner

09:36 AM Bug #8931 (Feedback): Service Watchdog PHP Errors

Fix committed in Service Watchdog pkg version 1.8.6, which will be up shortly after 2.4.4-RELEASE Jim Pingle

09/23/2018

02:14 PM Bug #8931: Service Watchdog PHP Errors

After hitting that uninstalling I'm unable to re-install:... Steve Wheeler

01:57 PM Bug #8931 (Resolved): Service Watchdog PHP Errors

PHP errors
PHP ERROR: Type: 1, File: /usr/local/pkg/servicewatchdog.inc, Line: 83, Message: Uncaught Error: ... Chris Linstruth

09/19/2018

06:44 PM Feature #8613: pfSense-pkg-acme: acme_certificates_edit.php - Add support for --challenge-alias acme.sh flag

Thanks for this nifty feature. It works well in most cases.
I've seen an issue with some DNS-Providers which are n... Markus Barckmann

09:40 AM Bug #8918 (Feedback): OpenVPN Client Export: First user does not get username added to filename

Fix coming in OpenVPN Client Export package version 1.4.17_2 Jim Pingle

09:39 AM Bug #8918 (Resolved): OpenVPN Client Export: First user does not get username added to filename

When attempting to export a VPN configuration for a user, if that user's ID is 0 then the username is not added to th... Jim Pingle

07:34 AM Bug #8916 (Not a Bug): Package Shellcmd doesn't install

> 2.4.4-DEVELOPMENT (amd64)
> built on Tue Sep 04 10:04:12 EDT 2018
> FreeBSD 11.2-RELEASE-p2
That snapshot is v... Jim Pingle

09/18/2018

10:49 PM Bug #8904: Shellcmd: pfBlocker's earlyshellcmd is being removed at boot

Added *Shellcmd package* functionality to *pfBlockerNG-devel* here:
https://github.com/pfsense/FreeBSD-ports/pull/56... BBcan177 .

09:16 AM Bug #8904 (Feedback): Shellcmd: pfBlocker's earlyshellcmd is being removed at boot

A previous fix to shellcmd to address PHP errors changed it from using references to using a copy of the config, whic... Jim Pingle

09:29 PM Bug #8916 (Not a Bug): Package Shellcmd doesn't install

2.4.4-DEVELOPMENT (amd64)
built on Tue Sep 04 10:04:12 EDT 2018
FreeBSD 11.2-RELEASE-p2
PHP ERROR: Type: 1, F... BBcan177 .

05:51 AM Bug #8909 (New): tinc package makes /rc.newwanip looping forever

I just realizd that each time the tincd(8) daemon is started, pfSense detects the new IP address on its dedicated int... Andrew Hotlab

09/17/2018

12:05 PM Bug #8904: Shellcmd: pfBlocker's earlyshellcmd is being removed at boot

On install, shellcmd imports the items from the earlyshellcmd tags and reformats them into the shellcmd package setti... Jim Pingle

08:56 AM Bug #8899 (Resolved): AWS-ipsec error

Fixed in commit:59e2c01227cc on factory-ports, aws-wizard pkg version 0.7_2 will contain the fix when it builds. Jim Pingle

07:27 AM Bug #8508 (Resolved): Haproxy: Selecting mode tcp with SSL in backend does not activate SSL in the server config

Jim Pingle

01:58 AM Bug #8508: Haproxy: Selecting mode tcp with SSL in backend does not activate SSL in the server config

Yes, this seems to be fixed for a while now (the upgrade was fun since it broke my workaround :D)). Thanks! Florian Apolloner

05:43 AM Bug #8903: pfBlockerNG: PHP error

Sorry, you're right, this is the -devel package. I'd forgotten I'd installed that.
I agree the earlyshellcmd issue... Steve Wheeler

04:22 AM Feature #8523: make cookie inserted by haproxy secure

Thank you! I do see the secure option in haproxy version 0.59_9.
Where did you add another options? Alex Kolesnik

09/16/2018

10:33 PM Bug #8903: pfBlockerNG: PHP error

Posted two PR to fix these issues and add other improvements.
https://github.com/pfsense/FreeBSD-ports/pull/567
h... BBcan177 .

08:11 PM Bug #8903: pfBlockerNG: PHP error

Steve, Are you sure this is not from pfBlockerNG-devel?
https://github.com/pfsense/FreeBSD-ports/blob/devel/net/pf... BBcan177 .

01:07 PM Bug #8903: pfBlockerNG: PHP error

This error looks to be triggering an unrequired config update:... Steve Wheeler

10:51 AM Bug #8903: pfBlockerNG: PHP error

Sorry clipped the line in the copy there. Actual warning is:... Steve Wheeler

10:50 AM Bug #8903 (Resolved): pfBlockerNG: PHP error

Seeing this on a clean install of pfSense-2.4.4.r.20180914.1530 and restoring an existing config.... Steve Wheeler

01:08 PM Bug #8904 (Resolved): Shellcmd: pfBlocker's earlyshellcmd is being removed at boot

The Shellcmd package is incorrectly removing the pfBlocker early shellcmd entry at each boot.... Steve Wheeler

08:16 AM Bug #8902: HAproxy package not use custom DNS for lookup on apply new config

Pi Ba wrote:
> Hmm, i suppose your right.
>
> You could add below to the 'global advanced pass thru', that should... DRago_Angel [InV@DER]

07:48 AM Bug #8902: HAproxy package not use custom DNS for lookup on apply new config

Hmm, i suppose your right.
You could add below to the 'global advanced pass thru', that should solve the issue.
<... Pi Ba

06:02 AM Bug #8902 (New): HAproxy package not use custom DNS for lookup on apply new config

Package Version:
haproxy-devel net 0.59_9
Package Dependencies:
haproxy-devel-1.8.13 
cat /etc/version
2.4.3... DRago_Angel [InV@DER]

09/15/2018

10:22 PM Bug #8900: pfBlockerNG

Fixed: https://github.com/pfsense/FreeBSD-ports/pull/567 BBcan177 .

04:05 PM Bug #8900 (Resolved): pfBlockerNG

Crash report begins. Anonymous machine information:
Current Base System 2.4.4.r.20180914.1544
amd64
11.2-RELE... Chris Macmahon

02:53 PM Bug #8899 (Resolved): AWS-ipsec error

2.4.4-RC (amd64)
built on Fri Sep 14 15:45:39 EDT 2018
FreeBSD 11.2-RELEASE-p3
Factory install aws-wizard: F... Chris Macmahon

09:20 AM Feature #8523: make cookie inserted by haproxy secure

I've added a bunch of cookie options.. Does it work for you? Pi Ba

09:19 AM Bug #8508: Haproxy: Selecting mode tcp with SSL in backend does not activate SSL in the server config

The server configuration now allows separate activation of ssl for regular traffic and for health-checks. That should... Pi Ba

07:02 AM Bug #8670 (Resolved): HAProxy PHP error

Chris Macmahon

07:02 AM Bug #8670: HAProxy PHP error

I am no longer seeing these errors.
Chris Macmahon

09/13/2018

08:44 AM Bug #8631 (Resolved): syslog-ng - logrotate incorrectly configured to rotate TLS key

Jim Pingle

09/11/2018

05:18 PM Bug #8887: Squid Proxy Interface not assignee to IPv6

For fix this issue maybe better not add IP at all if look to documentation: http://www.squid-cache.org/Versions/v3/3.... DRago_Angel [InV@DER]

05:06 PM Bug #8887 (Resolved): Squid Proxy Interface not assignee to IPv6

Package Version:
squid www 0.4.43_1
Package Dependencies:
squid-3.5.27_3
cat /etc/version
2.4.3-RELEASE
c... DRago_Angel [InV@DER]

02:29 PM Bug #8885: HAProxy "Log hostname parameter broke local syslog

Package Version:
haproxy-devel net 0.59_9
Package Dependencies:
haproxy-devel-1.8.13 

cat /etc/version
2.4.... DRago_Angel [InV@DER]

02:14 PM Bug #8885 (Closed): HAProxy "Log hostname parameter broke local syslog

DRago_Angel [InV@DER]

01:41 PM Bug #8670 (Feedback): HAProxy PHP error

Jim Pingle

09/10/2018

12:51 PM Bug #8139: LADVD not working on LAGG interfaces

Based on the discussion in the repo (https://github.com/sspans/ladvd/issues/36), the FreeBSD port has been updated: h... Tom Cosmos

04:37 AM Feature #8232: different ssl options based on the sni name

Hi Pi Ba,
looks like this patch not work with the most recent version of pfsense 2.4.3 P1. Can you check please?... Zoltan Beck

09/09/2018

06:37 PM Bug #8139: LADVD not working on LAGG interfaces

The creator of the LADVD package is saying this is likely fixed in his 1.1.2 implementation, and PFSense is still usi... Tom Cosmos

09/08/2018

03:16 PM Bug #8139: LADVD not working on LAGG interfaces

Created issue to track in official repo:
https://github.com/sspans/ladvd/issues/36 Tom Cosmos

09/07/2018

01:32 PM Bug #8103 (Resolved): squid monitor using hard coded logs location

Jim Pingle

01:30 PM Bug #8103: squid monitor using hard coded logs location

Issue can be closed, already merged on GitHub
https://github.com/pfsense/FreeBSD-ports/commit/b7c4da7878f8da6169c5... Nano Caiordo

09/06/2018

04:38 PM Feature #8878 (Resolved): Propagate user's description field into QR code for FreeRADIUS

Hi,
it is often desirable (esp. when you have more than one identity added in your Google Auth mobile app) to dist... Juraj Lutter

09/04/2018

02:36 PM Bug #8873 (Feedback): PHP7 warning in squidguard

Fix pushed. 824d08577196346be0e7d24d925bf3338208bd89
also cherry-picked to 2.4.4 3c1f879caabe7f9059e0a0143689d2d0b3c... Anonymous

11:15 AM Bug #8873 (Resolved): PHP7 warning in squidguard

[02-Sep-2018 21:00:29 Etc/UTC] PHP Warning: Use of undefined constant GIF_BODY - assumed 'GIF_BODY' (this will throw... Anonymous

02:31 PM Bug #8872: PHP7 error in squid

Cherry-picked to 2.4.4 as well d47455c16c985d3d98fea422855a0dc7bf78c657 Anonymous

02:28 PM Bug #8872 (Feedback): PHP7 error in squid

Fix Pushed 90c367bf2f2fcd61ed631bd3c4fd6634a253b5d6. Anonymous

11:14 AM Bug #8872 (Resolved): PHP7 error in squid

[02-Sep-2018 21:45:02 Etc/UTC] PHP Fatal error: Uncaught Error: Call to undefined function split() in /usr/local/pkg... Anonymous

02:51 AM Bug #8871: Suricata: input not validated properly in suricata_rulesets.php results in wrong argument passed to in_array()

Forgot to set Category -> Suricata.
Running b0703dcab3c(RELENG_2_4_4) (snapshot) with latest Suricata package availa... L H

02:50 AM Bug #8871 (Resolved): Suricata: input not validated properly in suricata_rulesets.php results in wrong argument passed to in_array()

Spotted this today:... L H

09/02/2018

10:35 PM Feature #8869: HAproxy should use RFC 7919 DH parameter files

It should not let you use a self-generated DH parameter file, but use the stock system DH parameter files which are f... Jim Pingle

10:20 PM Feature #8869 (New): HAproxy should use RFC 7919 DH parameter files

It would be really nice to have a UI option to generate a custom DH parameter file for HAproxy to use.
The origina... Stéphane Lapie

08/31/2018

05:36 AM Bug #8790 (Resolved): getting PHP error regarding HAproxy pkg

Anonymous

02:08 AM Bug #8790: getting PHP error regarding HAproxy pkg

Hi!
All OK, thanks! Greg M

08/30/2018

09:53 PM Bug #8829: Keep settings checkbox under Global Settings does not behave as expected

On a fresh install of 2.4.4.a.20180830.1356, when snort 3.2.9.7_2 is installed the output is :... Anonymous

09:30 PM Bug #8829 (Resolved): Keep settings checkbox under Global Settings does not behave as expected

Anonymous

09:17 PM Bug #8829: Keep settings checkbox under Global Settings does not behave as expected

On version 3.2.9.7_2, installed suricata, configured some settings, unchecked the Keep settings checkbox, uninstalled... Anonymous

11:37 AM Bug #8829 (Feedback): Keep settings checkbox under Global Settings does not behave as expected

This should now work as expected. c5d12ed2814f7ed5c002fb71fae6d992708bc4f9
Snort version 3.2.9.7_2 Anonymous

09:49 PM Bug #8828 (Resolved): Keep settings checkbox under Global Settings does not behave as expected

Anonymous

09:49 PM Bug #8828: Keep settings checkbox under Global Settings does not behave as expected

On a fresh install of 2.4.4.a.20180830.1356, when suricata 4.0.13_8 is installed the output is :... Anonymous

05:50 PM Bug #8828: Keep settings checkbox under Global Settings does not behave as expected

On version 4.0.13_8, installed suricata, configured some settings, unchecked the Keep settings checkbox, uninstalled ... Anonymous

11:17 AM Bug #8828 (Feedback): Keep settings checkbox under Global Settings does not behave as expected

Anonymous

11:17 AM Bug #8828: Keep settings checkbox under Global Settings does not behave as expected

I found that the code to remove the package forgot to use 'write_config()' after removing the Suricata configurations... Anonymous

04:49 PM Bug #8670: HAProxy PHP error

This issues with haproxy should be fixed with current 0.59_11 version. If not please let me know the exact error you ... Pi Ba

04:47 PM Bug #8790: getting PHP error regarding HAproxy pkg

Should be fixed with current 0.59_11 version. If not please let me know the exact error you get and when that happens. Pi Ba

04:47 PM Bug #8833: haproxy getarraybyref error

Should be fixed with current 0.59_11 version. If not please let me know the exact error you get and when that happens. Pi Ba

07:59 AM Bug #8620 (Resolved): arpwatch database page is not accessible

Jim Pingle

07:59 AM Bug #8620: arpwatch database page is not accessible

Gitsynced, retested - now looks good, no arpwatch duplicated processes Vladimir Lind

07:51 AM Bug #8620: arpwatch database page is not accessible

OK to test again after a gitsync or an update to a snapshot which includes my last commit on #8850 Jim Pingle

07:40 AM Bug #8620: arpwatch database page is not accessible

Looks like one line of my commit is missing, will push a correction momentarily. The package is OK, the problem is on... Jim Pingle

04:44 AM Bug #8620: arpwatch database page is not accessible

Yup, seeing the same on Wed Aug 29 19:26:24 EDT 2018 with pfSense-pkg-arpwatch-0.1.1:
root 37039 0.0 0.3 ... Vladimir Lind

08/29/2018

08:43 PM Bug #7661: pfBlockerNG doesn't make a rule for Antarctica

I just tried the latest pfBlockerNG and the is has NOT been resolved!
Please re-open the bug.
Stuart Wyatt

08:25 PM Bug #8620: arpwatch database page is not accessible

On 2.4.4.a.20180829.1926 (gitsync'd to master) with arpwatch version 0.1.1,
Seeing one instance of arpwatch for ea... Anonymous

02:10 PM Bug #8620 (Feedback): arpwatch database page is not accessible

Should be improved by https://github.com/pfsense/FreeBSD-ports/commit/aa78e490fe92d5640a742bbe77012a5ba626b084 but th... Jim Pingle

07:34 AM Feature #8613: pfSense-pkg-acme: acme_certificates_edit.php - Add support for --challenge-alias acme.sh flag

Greg M wrote:
> I am on:
> 2.4.4-DEVELOPMENT (amd64)
> built on Wed Aug 29 00:38:57 EDT 2018
> FreeBSD 11.2-RELEA... Renato Botelho

06:32 AM Feature #8613: pfSense-pkg-acme: acme_certificates_edit.php - Add support for --challenge-alias acme.sh flag

I am on:
2.4.4-DEVELOPMENT (amd64)
built on Wed Aug 29 00:38:57 EDT 2018
FreeBSD 11.2-RELEASE-p2
The system is ... Greg M

05:34 AM Feature #8613: pfSense-pkg-acme: acme_certificates_edit.php - Add support for --challenge-alias acme.sh flag

Greg M wrote:
> Hi!
>
> Installed, when I open it:
>
> Fatal error: Uncaught Error: Call to undefined function... Renato Botelho

01:13 AM Feature #8613: pfSense-pkg-acme: acme_certificates_edit.php - Add support for --challenge-alias acme.sh flag

Hi!
Installed, when I open it:
Fatal error: Uncaught Error: Call to undefined function pfsense_pkg\acme\getarra... Greg M

01:14 AM Bug #8790: getting PHP error regarding HAproxy pkg

Same here.
Haproxy is not installed after this error and services are down. Greg M