Activity
From 01/19/2012 to 02/17/2012
02/15/2012
-
03:42 PM Revision e32805d9: Merge pull request #49 from yakatz/master
- 2038 bug in user manager
-
02:57 AM Revision 37129ab8: Ticket #2157. Add missing call to relayd_configure()
-
01:29 AM Revision 4d148b59: Convert strtotime() to DateTime object to fix 2038 roll-over issue.
02/14/2012
-
06:53 PM Revision eaf23c17: Add button to download a .p12 of a cert+key. Implements #2147
-
06:52 PM Revision be065c25: Add button to download a .p12 of a cert+key. Implements #2147
-
06:03 PM Revision a5a483e0: Reject an interface without a subnet as a network source in the IPsec Phase 2 GUI. Fixes ticket #2201
-
06:02 PM Revision d8ee5cfe: Reject an interface without a subnet as a network source in the IPsec Phase 2 GUI. Fixes ticket #2201
-
05:32 PM Revision cf0a2714: Don't let an empty subnet into racoon.conf, it can cause parse errors. Ticket #2201
-
05:00 PM Revision 50e6e274: Don't let an empty subnet into racoon.conf, it can cause parse errors. Ticket #2201
02/13/2012
-
08:07 PM Revision 009685b8: Fix reference to PPTP secondary RADIUS server shared secret.
- See http://forum.pfsense.org/index.php/topic,46103.0/topicseen.html
-
08:06 PM Revision 846a6dc2: Fix reference to PPTP secondary RADIUS server shared secret.
- See http://forum.pfsense.org/index.php/topic,46103.0/topicseen.html
-
07:47 PM Revision 02de5c07: Correct checking if a gif is part of bridge so that it actually works correctly adding a gif after having created it on bootup
-
07:47 PM Revision ae0dde65: Correct checking if a gif is part of bridge so that it actually works correctly adding a gif after having created it on bootup
02/11/2012
02/10/2012
02/08/2012
-
09:04 PM Revision 10fb17c1: Resolves #2052. Remove duplicate rule
-
09:03 PM Revision c92fb4c4: Resolves #2052. Remove duplicate rule
-
12:08 PM Revision 09f638b6: Make sure to pass the string, not the array
-
11:54 AM Revision 51c57aae: Perform actual 128 bit operations to make sure we get the math right.
-
07:59 AM Revision fa3ee91d: Another try to eliminate the warning 'PHP Warning: Cannot modify header information - headers already sent by (output started at /etc/inc/authgui.inc:201) in /usr/local/www/guiconfig.inc on line 47'
-
07:59 AM Revision 9252d093: Another try to eliminate the warning 'PHP Warning: Cannot modify header information - headers already sent by (output started at /etc/inc/authgui.inc:201) in /usr/local/www/guiconfig.inc on line 47'
-
06:38 AM Revision c58715af: Change to embed to prevent IE9 from misbehaving. Ticket #2165
-
05:32 AM Revision c28fae2f: Revert "Check if a session already exists to avoid errors issued by php on sesion_start being called on existing session"
- This reverts commit 9b2de7e2a6afab31e1a62ac8d54435975a22a9a7.
02/07/2012
-
08:35 PM Revision 9b2de7e2: Check if a session already exists to avoid errors issued by php on sesion_start being called on existing session
-
08:26 PM Revision 2890cae5: Fixes #2082. Actually just correct the log to display the correct information
-
08:24 PM Revision fbdc4b56: Fixes #2082. Actually just correct the log to display the correct information
-
08:20 PM Revision 443abb31: Fixes #2082. Correct checking of existing session to take into consideration when possible/needed the mac address
-
08:19 PM Revision 843a6fe2: Fixes #2082. Correct checking of existing session to take into consideration when possible/needed the mac address
-
08:01 PM Revision 5c0d5003: Correct field name
-
07:06 PM Revision 67e73dcd: Fixes #1999. Upgrade bvoucher config as well during CP upgrade to multi-instance
-
04:30 PM Revision c7fc14a1: Since the CARP interface name changed to vip, devd needs to follow that change as well.
-
04:29 PM Revision 125a1098: Since the CARP interface name changed to vip, devd needs to follow that change as well.
02/06/2012
-
04:12 PM Revision 8b320242: Unset previously set voucher sync information
-
04:10 PM Revision 2720e1ce: Unset previously set voucher sync information
02/04/2012
-
11:41 AM Revision 530b980c: Add nat rule if the target is in a subnet handled by a static route whose gateway is in the interface's subnet. Ticket #2163
-
11:41 AM Revision aa8d9918: Add static route subnets if their gateway is within the source subnet for the nat rule. Ticket #2163
-
11:14 AM Revision b9f637a7: Add nat rule if the target is in a subnet handled by a static route whose gateway is in the interface's subnet. Ticket #2163
-
09:30 AM Revision 1716682b: Add static route subnets if their gateway is within the source subnet for the nat rule. Ticket #2163
-
08:12 AM Revision 467a0304: Use the specific IP for NAT IP in filter_generate_reflection_nat to prevent a condition with multiple subnets on the same interface where replies get sent to the wrong IP.
-
08:07 AM Revision bf443dfe: Use the specific IP for NAT IP in filter_generate_reflection_nat to prevent a condition with multiple subnets on the same interface where replies get sent to the wrong IP.
- 05:53 AM Revision 459bb026: correct branches in gitsync
02/03/2012
- 08:28 PM Revision a748b372: Rename function and use variable
- 08:24 PM Revision 5a7e41e6: Add builder binary
- 08:23 PM Revision 8ff4e4d4: Support for configuring the configuring Unbound service
-
12:03 AM Revision 317b7e43: Revert "Combine RTT and Loss so that IPV6 addresses do not cause spillage into other widgets." - until I find the code that does ajax as well.
- This reverts commit 1d09d6dbcd80546aec7bc3a91d3c862b00662662.
02/02/2012
-
11:58 PM Revision 1d09d6db: Combine RTT and Loss so that IPV6 addresses do not cause spillage into other widgets.
-
04:20 PM Revision 6fbe0168: If the sticky option is changed, restart relayd. Fixes #2157
-
03:12 PM Revision eb7454c4: Don't use $pconfig in widgets, it has unintended side effects.
-
03:11 PM Revision 1bd549c4: Don't use $pconfig in widgets, it has unintended side effects.
02/01/2012
-
09:53 PM Revision f33030aa: PPTP upgrade needs to declare $config a global.
-
09:52 PM Revision 5bcb312a: PPTP upgrade needs to declare $config a global.
-
08:33 PM Revision 6bc32273: Merge pull request #45 from namezero111111/patch-11
- Wireless client config should allow blank SSID (resubmit, fixed blank li...
-
08:29 PM Revision cb3c3fe4: Wireless client config should allow blank SSID (resubmit, fixed blank lines)
-
06:28 PM Revision de5aec97: If the old bindlan option is there, assume the lan interface for binding.
-
06:28 PM Revision c82b2c3f: Change SNMP binding option to work on any eligible interface/VIP. Fixes #2158
-
06:27 PM Revision bc146558: If the old bindlan option is there, assume the lan interface for binding.
-
06:23 PM Revision 18d4d360: Change SNMP binding option to work on any eligible interface/VIP. Fixes #2158
- 05:58 PM Revision d835ffc8: Also write out the rules that caused the problem to ease troubleshooting.
-
12:36 PM Revision dd576193: Add code that expresses the default gateway calculated from the broker address.
- The stf adapter was correctly setup from the WAN IPv4 address apparently
Adds to ticket #2117 -
11:36 AM Revision f87ccbed: Add more backend code to calculate the 6RD broker IPv6 address from the IPv4 broker address.
- Adds to ticket #2117
01/31/2012
-
07:06 PM Revision 7a58a4ca: Only do foreach on the p2's if it's actually an array.
-
07:04 PM Revision a11df336: Only do foreach on the p2's if it's actually an array.
01/30/2012
-
09:40 PM Revision 9f2bf2e2: Fix exec bit
-
09:40 PM Revision 51f4e64b: Add a small script to disable APM on ATA drives if they claim to support it. Leaving this on will kill drives long-term, especially laptop drives, by generating excessive Load Cycles.
- The APM bit set will persist until the drive is power cycled, so it's necessary to run on each boot to be sure.
-
09:27 PM Revision a000752b: Fix exec bit
-
09:24 PM Revision 92ac3b3d: Add a small script to disable APM on ATA drives if they claim to support it. Leaving this on will kill drives long-term, especially laptop drives, by generating excessive Load Cycles.
- The APM bit set will persist until the drive is power cycled, so it's necessary to run on each boot to be sure.
01/26/2012
-
05:18 PM Revision e8fc69ff: Be smarter about how to split a Namecheap hostname into host/domain. Fixes #2144
-
05:11 PM Revision 89bbb204: Be smarter about how to split a Namecheap hostname into host/domain. Fixes #2144
-
06:38 AM Revision 6f0dc800: Merge pull request #42 from Joecowboy/master
- .
-
04:46 AM Revision 83e7491d: Update usr/local/www/widgets/javascript/cpu_graphs.js
01/25/2012
-
08:39 PM Revision 6763033d: Include admin user in bootup account sync
-
08:28 PM Revision b357f0a6: Include admin user in bootup account sync
-
05:40 PM Revision a843870d: Fix LZO setting for Upgraded OpenVPN (was turning compression on even if old config had it disabled.)
-
05:40 PM Revision 0d2156e5: Fix LZO setting for Upgraded OpenVPN (was turning compression on even if old config had it disabled.)
-
05:17 PM Revision 1f78ab3a: Make sure we stop the configure if the device does not have a public address
- Ticket #2117
-
05:17 PM Revision 668e8961: Add backend 6RD support. We don't have the required patch yet for our stf driver.
- Needs hooks into our gateway code to handle the default gateway since the stf interface does use router solicitations...
-
05:11 PM Revision 48e24ada: Fix upgrade code for 1.2.3 with assigned OpenVPN interface.
-
05:11 PM Revision d87d2f67: Fix upgrade code for 1.2.3 with assigned OpenVPN interface.
-
04:34 PM Revision c3ae41e6: Don't ignore when multiple OpenVPN DNS, NTP, WINS, etc servers were specified in 1.2.3 when upgrading. 1.2.3 separated by ;, 2.x uses separate vars.
-
04:33 PM Revision 4724f8b8: Don't ignore when multiple OpenVPN DNS, NTP, WINS, etc servers were specified in 1.2.3 when upgrading. 1.2.3 separated by ;, 2.x uses separate vars.
-
03:59 PM Revision a15a7738: Safer for 1.2.3 upgrades to assume OpenVPN interface == any, since 1.2.3 didn't have a way to bind to an interface. Otherwise people accepting connections on opt interfaces on 1.2.3 will break on upgrade until the proper interface is selected in the GUI
-
03:56 PM Revision 3ef4cae6: Safer for 1.2.3 upgrades to assume OpenVPN interface == any, since 1.2.3 didn't have a way to bind to an interface. Otherwise people accepting connections on opt interfaces on 1.2.3 will break on upgrade until the proper interface is selected in the GUI
-
02:45 PM Revision 32dc8109: Clarify the UI text with example IPv6 prefix.
- Ticket #2117
-
02:45 PM Revision 0eb78676: Disable debug statement
- Ticket #2117
-
01:33 PM Revision 7d567088: Add gui knobs for 6RD support ticket #2217
-
10:17 AM Revision b5a97555: Remove rtsol debugging output
01/24/2012
-
09:14 PM Revision aa291f19: Comment out debug print for cert verification
-
09:14 PM Revision e5a2fed7: Comment out debug print for cert verification
-
08:04 PM Revision 9261370d: Check to see if the pid file exists before trying to kill anyprocess
-
08:04 PM Revision d224df18: Check to see if the pid file exists before trying to kill anyprocess
01/23/2012
-
07:15 PM Revision 9fd14591: Be more careful when creating and removing a user, to only alter a user if it really matches the passwd entry. Fixes #2066
- pw usershow likes to ignore what you want even with -n and if the user is numeric and doesn't exist, it fetches by ui...
-
07:13 PM Revision a82b1ab1: Be more careful when creating and removing a user, to only alter a user if it really matches the passwd entry. Fixes #2066
- pw usershow likes to ignore what you want even with -n and if the user is numeric and doesn't exist, it fetches by ui...
-
10:02 AM Revision 48a01262: Correct getNasIP in 2.0.x branch to be correct. There is no multi-zone support in 2.0.x
01/21/2012
-
09:24 PM Revision 51e9533f: Removing unnecessary inclusions of prototype.js, guiconfig.inc already includes this file
-
08:08 PM Revision 86cf3681: making small fixes on jQuery code
-
07:39 PM Revision 30a8ef77: Converting javascript code to jQuery on installer webgui
-
03:56 AM Revision f314bad6: Only add these lines if there is both an IP address and CIDR. Fixes #1882
-
03:30 AM Revision fa984be9: Only add these lines if there is both an IP address and CIDR. Fixes #1882
01/20/2012
-
06:03 PM Revision b0c76f18: Ticket #2114. Remove define_syslog_variables since its deprecated and probably not needed
-
04:05 PM Revision 199c320b: Bump upload size to 128mb, the firmware updates (at least for now while testing) are a bit too large for the old value.
-
01:29 PM Revision d1fc1182: Correct the Called-Station-Id attribute setting to be consistent on the data sent
-
12:57 PM Revision 48387425: Should be preg_split instead of explode
-
12:25 PM Revision 33266794: Correct the Called-Station-Id attribute setting to be the same on STOP/START packets
-
12:23 PM Revision 212ab80f: Correct the Called-Station-Id attribute setting to be the consistent on authentication packets
-
12:21 PM Revision cff5204a: Correct the Called-Station-Id attribute setting to be the same on STOP/START packets
-
11:18 AM Revision 2ce660ad: Unbreak a number of explode() replacements which required preg_split()
01/19/2012
-
11:20 PM Revision 26275879: Empty the file
-
11:19 PM Revision 873c6cef: Add dummy file that was removed in FBSD 9 that keeps the installer from borking. This is much easier than rengerating the patch that is against the installer.
-
07:50 PM Revision 6ac18f9d: mhash -> hash change from Ermal
-
07:48 PM Revision d9867431: Change from mhash to hash module, mhash is depreciated.
-
07:33 PM Revision cfbfd941: The function split() is replaced by the function explode(). Starting with PHP 5.3 this is deprecated and with version 6 gone.
- Replacing it surpresses all the warnings
-
07:03 PM Revision 80c88a68: Fix the config patch to the dhcp6 relayx
-
07:01 PM Revision 77b86ada: Mute error: Undefined variable: g in /etc/inc/shaper.inc on line 4062
-
06:58 PM Revision 54213e81: Add class PEAR5 code rather than a new file
-
06:50 PM Revision 0d6fee24: Update PEAR.inc code to latest version
Also available in: Atom